Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A105 HIC and low S & P

Status
Not open for further replies.
abbver98

abbver98

Mechanical
Joined
Jun 21, 2002
Messages
195
Location
BE
Does billet for forging A105N exits with HIC certificate (to NACE TM0284) and with low S & P ?
I have a customer requiring this material for his NACE application. Anybody supply this kind of material ? Is any other material exist with HIC and Low S & P ?

I appreciate your answer.
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
Mike Mike
  • Locked
  • Question Question
Am I supposed to specify mortar type M, S, N, or O?
Replies
9
Views
3K
phamENG
phamENG
gwalkerb
  • Locked
  • Question Question
A420 Gr WPL6 impact test temperature documentation & unit systems
Replies
5
Views
1K
gwalkerb
gwalkerb
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
MujtabaQA
  • Locked
  • Question Question
Who can explain about Thin-wall pipe as per ASTM standard
Replies
6
Views
2K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top