Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
A1011 grade 36 vs A36
- Thread starter tdecamp94
- Start date
Obviously the bottom line information would be for you to simply buy from ASTM each of the two standards.
Basically they are identical except A1011 covers steel thicknesses up to 0.230" and A36 covers steel thicknesses above that point. A1011 is viewed as a sheet steel while A36 is viewed as plate.
Basically they are identical except A1011 covers steel thicknesses up to 0.230" and A36 covers steel thicknesses above that point. A1011 is viewed as a sheet steel while A36 is viewed as plate.
- Status
Similar threads
- Locked
- Question
- Locked
- Question