S
shortcut
Guest
I used generate dimensions command to convert scketch datas into drafting. And the dimensions apeeared green on draft. I cant change its color to black. How can i do it? Thanks so much.
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
- Status
- Thread starter
- #2
L
lspieler
Guest
Shortcut
Try this go to your tools options drafting,dimensions,Analysis display mode and make sure it is de-activated. If you check the types and colors the default for dimensions generated by 3D constraints is light green. Not sure that this is your problem but it is worth a shot.
Try this go to your tools options drafting,dimensions,Analysis display mode and make sure it is de-activated. If you check the types and colors the default for dimensions generated by 3D constraints is light green. Not sure that this is your problem but it is worth a shot.
- Thread starter
- #3
S
shortcut
Guest
Thanks
Thank you so much....
it is working.
Thank you so much....
it is working.- Status