websenseavoid
Electrical
Has anyone tried to connect Siemens 6MD bay unit to LSA system using IEC 103 protocol?
Basically, i parameterized the unit as a Numerical protection device of "other" manufacturer in LSATOOLS and set the information scope according to VDEW.
I tried generating single and double point indications using DIGSI and the LSA receives them correctly.
However, I'm not sure how to configure the analog value telegrams in LSATOOLS. I activated the 3-phase measurement packet in DIGSI and it automatically put the relevant informations to system interface with fixed function type and information number. Now I'm not sure how to configure that in LSATOOLS and the manuals aren't very helpful. I tried several configurations with no success.
Basically, i parameterized the unit as a Numerical protection device of "other" manufacturer in LSATOOLS and set the information scope according to VDEW.
I tried generating single and double point indications using DIGSI and the LSA receives them correctly.
However, I'm not sure how to configure the analog value telegrams in LSATOOLS. I activated the 3-phase measurement packet in DIGSI and it automatically put the relevant informations to system interface with fixed function type and information number. Now I'm not sure how to configure that in LSATOOLS and the manuals aren't very helpful. I tried several configurations with no success.
http://files.engineering.com/getfile.aspx?folder=c702f7d1-f2bb-4fce-91ae-1e2fd211f898&file=digsi.PNG
