Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

6 inch flanged body valve radiography with ir-192

Status
Not open for further replies.

kamal62

Nuclear
Joined
Jan 10, 2015
Messages
1
Location
CA
What's the best SDF and source angle to make a radiography of the drilled holes flange of 6 inch body flanged valve
with ir-192 with the minimum image distortion of the holes.
Thanks so much the answer will be a great help.

Kamal62
 
kamal62,
The most important information you haven't given us is what you are actually looking for ?
Regards,
DD
 
That's going to be a hard shot to get. I'd consult a lvl 2 or 3 radiographer. I'm sure one works at your local inspection company. Source a few and get their opinions over the phone.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top