Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

5HP DC Motor

Status
Not open for further replies.
Replies continue below

Recommended for you

Baldor/Reliance makes a wide range of motors. I would try them. What are your reasons for a DC motor??? Your looking at a rather expensive motor. Probably on the $2,500-$3,000 range. This motor here might will work if your not limited to the over-all length.
 
 http://files.engineering.com/getfile.aspx?folder=4ade6cb5-1a79-473a-84aa-83daa9da43a0&file=CDP3605-36LYP179[1].pdf
What voltage? If you can operate at low voltage (24vdc - 48vdc) look for "Golf Cart" motors. Much less expensive that industrial motors.

[link ]
btn_liprofile_blue_80x15.gif" width="80" height="15" border="0" alt="View Clyde's profile on LinkedIn
[/url]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor