Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

500kV substation at 575kV

Status
Not open for further replies.

jacob13

Electrical
Nov 11, 2005
8
Has any company experience to operate 500/550kV substation equipment (circuit breakers, CCVTs, disconnect switches, surge arresters, etc.) at 575kV continuously, up to 2 hours.
 
Replies continue below

Recommended for you

before any studies , it should be assure there is no problem of INSURANCE for EHV euipment operation because Standard does not define this limit.
 
If you have a transformer, it will not like the higher voltage and would likely saturate.

"Theory is when you know all and nothing works. Practice is when all works and nobody knows why. In this case we have put together theory and practice: nothing works... and nobody knows why! (Albert Einstein)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor