Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

4" Ball Valve

Status
Not open for further replies.

clewis1

Marine/Ocean
Joined
Jan 10, 2008
Messages
1
Location
US
I work in the marine industry and truely need help in finding a particular size ball valve. It is a 4" Ball Valve straight pipe threaded 7" End to End and it need to be 316 S/S. Also I need 4 of them. I would appreciate If anyone can direct me to a manufacturer. Thank you very much.

Carla Lewis
Newport Shipyard
 
Hi,Carla Lewis

We are a valve manufacturer specilized valves for many years,including ball valve,butterfly valve,gate valve check valve ,etc

I wish I could assist you but your quantity is too small to operate.

Please feel free to contact me if our valve could be helpful in the near further.

sincerely
Michael email:hrwt03@hotmail.com web:
 

I doubt this animal exists as a standard product, and you will probably either have to have it made (at high cost) or rebuild the pipeline.

Normal building length for a 4" full bore ball valve, will be at short, flanged (European) about 175mm (about 6,88") with almost no room for (inside?) threads. Long building length (for inside threaded) for same will be 270mm (about 10,6mm)

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top