jyro
Industrial
- Jun 24, 2006
- 4
The company I work for is trying out 4 Effector viberation sensors on 4 bearings on one machine. We have a 4-20ma signal that needs to go to each sensor to tell it the motor speed. We have one 4-20 signal at the terminal strip at that machine. The PLC is far away and we don't have additional outputs avilable. Anyone know of a device that will split that single 4-20 into 4 isolated 4-20 sourcing outputs. We already have 24v dc power at the same terminal strip to power a splitter if needed. Thanks in advance