Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

3D Printing with ESD filament in Hazardous location C2D2 Group G

Status
Not open for further replies.
Ele-HAzloc

Ele-HAzloc

Electrical
Joined
Jan 10, 2020
Messages
8
Location
CA
Hi,
We have a component with a special shape to design for our dust collection piping system and we thought of using a 3D printed part build with a ESD plastic filament and the following characteristic : surface resistance between 10^7 - 10^9.

The component will be installed between 2 stainless steel component bonded by an external wire. What can be the limitation of that kind of component?

Thanks,
 
Status
Not open for further replies.

Similar threads

stfire
  • Question Question
Foam bladder tank location
Replies
6
Views
4K
stfire
stfire
E
  • Question Question
When to include exterior dry sidewall sprinklers in calculations with interior sprinklers?
Replies
1
Views
3K
TravisMack
TravisMack
N
  • Locked
  • Question Question
Help with Fire Sprinkler Design Area
Replies
5
Views
9K
Danefre
Danefre
SprinklerDesigner2
  • Question Question
Hydrant flow test with static and residual obtained DOWNSTREAM the flowing hydrant on a dead end line.
Replies
7
Views
14K
cdafd
cdafd
M.Jamali
  • Locked
  • Question Question
Hi there i hope all is good with
Replies
1
Views
406
TravisMack
TravisMack

Part and Inventory Search

Sponsor

Back
Top