Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

3d experience stamping die design role 2

Status
Not open for further replies.
TiagoFigueiredo

TiagoFigueiredo

Industrial
May 22, 2013
503
Anybody have seen already this working?
I have watched a webinar about this role, and it was quite interesting for my job... What is know at the moment about this? anyone have tested this?

If it's affordable I must think in 3d experience as an alternative...

Tiago Figueiredo
Tooling Engineer

Youtube channel:
 
Replies continue below

Recommended for you

Sort by date Sort by votes
That's interesting. I already question my Var about this. I'm still waiting for his information.
I would like to make a trial, but I've never used 3d experience before. Maybe I will waste much time learning 3d Experience, and don't have the needed time to see the capabilities of this new role.

Tiago Figueiredo
Tooling Engineer

Youtube channel:
 
Upvote 0 Downvote
Yes i've already see a lot of videos of 3d experience. unfortunately , never test it. As far as I've understand, the improvements in user interface, are really interesting. V5 it's becoming outdated in terms of GUI, compared to others, and also needs more mouse clicking than others. I hope that the number of mouse clicks, have been improved.

Tiago Figueiredo
Tooling Engineer

Youtube channel:
 
Upvote 0 Downvote
For me in v5 don't make any sense, of insert a dimension in a sketch, and then have the need of double click it, to change it's value. And if i'm doing a fine tuning of the value of dimension, I need to double click it again, and adjust the value. That's one of the examples....

Tiago Figueiredo
Tooling Engineer

Youtube channel:
 
Upvote 0 Downvote
Today, I went to my Var to have my first taste of 3d Experience. It was the R2018X

we focused a lot in the plm, it's really interesting. For a person, like me, that uses the old V5, managing all files, with windows folders, it's a big new.
Usually, for control the version of the files, we have implemented in our company that the file and part number should have a Part number + -00 to control versions. With plm there is no need of use it. It's a bit confusing not to see files, but it's something that we must get used. It's really amazing the amount of information, that can be located in the plm.

Regarding the CAD. what a fresh air coming inside it. It's really a step forward that user interface. I was amazed in the way that they have reduced the mouse clicks.And by the way, the generative shape design role, is far superior than the GS1 in v5. And according to my VAR, in a much interesting price. According to him cheaper than V5, in this particular case.

@Ferdo- Regarding macros, the automation, is exposed in the same way that V5? With same functionalities?

Tiago Figueiredo
Tooling Engineer

Youtube channel:
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

CAD2015
  • Question
SOLIDWORKS: Cloud 3D CAD browser-based vs locally 3D CAD installed 5
Replies
8
Views
4K
drawoh
drawoh
Channo
  • Locked
  • Question
Need help with increasing poly count of 3D model
Replies
9
Views
854
3DDave
3DDave
CAD2015
  • Locked
  • Question
3D Modeling 'Save View"..............
Replies
9
Views
477
CAD2015
CAD2015
CAD2015
  • Question
SolidWorks vs 3DEXPERIENCE SolidWorks 1
Replies
4
Views
2K
CAD2015
CAD2015
Imposter666
  • Locked
  • Question
What is the best practice to 3D model and detail weldments that have sheet metals as a part of them.
Replies
11
Views
897
Jboggs
Jboggs

Part and Inventory Search

Sponsor

Back
Top Bottom