Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
36"NB - 1500# rated Weld neck Flange
- Thread starter roca
- Start date
LittleInch
Petroleum
Apparently B16.47 originally did cover #1500 but only in the original 1982 edition. So if you can find one of those you could try that...
Otherwise you're into special flange design.
See similar posts below.
Basically choose a different flange spec (Norsok L-005)or design a special flange to ASME VIII design
36" class 1500 is a huge force. I would weld it....
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Otherwise you're into special flange design.
See similar posts below.
Basically choose a different flange spec (Norsok L-005)or design a special flange to ASME VIII design
36" class 1500 is a huge force. I would weld it....
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question
- Locked
- Question