We're looking for a tap drill size for 3/8"-28 UN tap. The Machinery Handbook lists this thread as existing, but does not provide a drill size. Hours of google searching by two of us has also not provided any leads. Was wondering if any of you fine people might know or had a way of finding it? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
3/8"-28 Tap Drill
- Thread starter oldeskool
- Start date
MikeHalloran
Mechanical
0.339" or an 'R' drill should be a good start.
Mike Halloran
Pembroke Pines, FL, USA
Mike Halloran
Pembroke Pines, FL, USA
- Status
Similar threads
- Locked
- Question