Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

2015 IBC

Status
Not open for further replies.

hawkaz

Structural
Oct 28, 2010
415
San Antonio has already adopted the 2015 IBC. Is anyone aware of any major structural changes?
Since everything seems to be reference based now, I doubt it- but wanted to see if anyone knew differently

 
Replies continue below

Recommended for you

The 2015 IBC references the updated SDPWS 2015 from the AWC. The most significant changes to the SDPWS involve shearwall calculations:

Sec. 4.3.3.4.1
Sec. 4.3.4.2
Table 4.3.4 footnotes

There are also some significant changes to diaphragms involving open front structures.

More details are spelled out here:


A confused student is a good student.
Nathaniel P. Wilkerson, PE
 
I think the biggest changes are in the references. For example, ACI 318-14 is quite a bit different that ACI 318-11.
Not to mention buying all those new references.
 
It’s thinner, uses larger print, has been made more succinct, costs less and will hereinafter be reissued less frequently.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor