Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

2009 IBC Wind

Status
Not open for further replies.

vandede427

Structural
Aug 13, 2008
344
Is anybody using the new Alternate All Heights method develped by SEA-Wash?

Attended a seminar on it yesterday and wanted some feedback from people actually using it.
 
Replies continue below

Recommended for you

I believe my son is. What questions do you have?

Mike McCann
MMC Engineering
Motto: KISS
Motivation: Don't ask
 
like it better than ASCE?
dislike it?
same?
don't care?
easier?
not easier than ASCE?
any cases where it doesn't apply well?
 
I tried a standard wind design using Method 2 analysis and the new Alternate Analysis. I got through the Alternate Analysis is about 1/8th the time and it yielded similar results. Therefore, I like it. That said, I won't actually use it in practice until IBC 2009 is locally adopted here, which will probably be years from now.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor