tinbanger21
Mechanical
Where can I find the O.D deminsion, for a 2 1/2" stainless steel NPT half coupling grade 304/L ASTM A182.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
2 1/2" stainless half coupling 1
- Thread starter tinbanger21
- Start date
- Status
-
1
- #2
eromlignod
Mechanical
- Jul 28, 2006
- 402
From McMaster-Carr:
High-pressure ASME/ANSI (3000 psi) OD = 3.63"+
Low-pressure ASTM (1000 psi) OD = 3.33"
Don
Kansas City
High-pressure ASME/ANSI (3000 psi) OD = 3.63"+
Low-pressure ASTM (1000 psi) OD = 3.33"
Don
Kansas City
moltenmetal
Chemical
Use with caution: experience has shown that half-couplings are notoriously inconsistent in OD and length.
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question