Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

1897 Chicago Building Floor Loads 1

Status
Not open for further replies.

bdlc2k

Structural
May 6, 2010
26
Hey everyone
We are working on an improvement project in an old Chicago building. The structure dates back to 1897. The 1st floor is old clay tile and steel floor system over a basement. I am trying to find out what the design loads may have been and how to determine the capacity of this type of floor. Any help is appreciated. Thanks!
 
Replies continue below

Recommended for you

Thanks, JAE
I do have the first pdf that you posted. I read an article somewhere which discusses the design loads for buildings during this time. You wouldn't happen to know how to find those or determine them would you?
 
From this link:

From the city's inception in 1837, Chicago's Health Department regulated the built environment to reduce threats from fire and disease. Within a generation, the regulations addressed numerous issues concerning the construction, alteration, and maintenance of residential, industrial, and commercial structures. In 1875, the city codified these regulations and created a Department of Buildings to administer the code.

The code never satisfied reformers. In the 1890s, Hull House residents investigated their neighborhood to reveal the extent of sanitation problems among the poor. Despite a revision of the code, problems remained, due to severe overcrowding. So in 1900, the City Homes Association commissioned a much larger survey directed by Robert Hunter. Hunter canvassed immigrant neighborhoods and presented a sophisticated statistical analysis. Social scientists Edith Abbott and Sophonisba Breckinridge expanded this work in their attempt to establish a scientific basis for the study of poverty. Their efforts led to tenement codes setting minimum requirements for light, air, ventilation, and plumbing.
 
Per this link: Google Book Link there was a "Chicago Building Code" of 1875.

Doesn't seem to show up on Google Books but you could look.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor