Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

1746-BAS M1 File Reading to the PLC

Status
Not open for further replies.
magus1111

magus1111

Electrical
Joined
Jul 16, 2005
Messages
3
Location
US
We are trying to read data from a York Chiller serial printer port that I have captured in an Allen-Bradley SLC Basic Module Serial port. We've parsed the data into its integer values, but am having trouble with the M1 File handshaking to read it in the SLC5/03 PLC. Does anyone have example logic reading the M1 File in a SLC?
Thanks!
 
Status
Not open for further replies.

Similar threads

KGisME
  • Locked
  • Question Question
Help a non-PLC guy with this control application
Replies
14
Views
5K
KGisME
KGisME
HydroBuff
  • Locked
  • Question Question
Remote PLC Updates and Diagnostics Via Ethernet
Replies
0
Views
948
HydroBuff
HydroBuff
506818
  • Locked
  • Question Question
Multiple PID Loops (PLC)
Replies
3
Views
1K
xnuke
xnuke
cames
  • Locked
  • Question Question
PLC Control for small lab setup automation help
Replies
5
Views
2K
3DDave
3DDave
SA07
  • Locked
  • Question Question
Can we operate Emerson Scada system/Server with Siemens PLC 400 ?
Replies
1
Views
1K
thermionic1
thermionic1

Part and Inventory Search

Sponsor

Back
Top