Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

16" DIP Cost 1

Status
Not open for further replies.
mweng

mweng

Civil/Environmental
Joined
Nov 15, 2002
Messages
29
Location
US
Anyone have an estimate on cost to install 16" DIP in NY/NJ area?
 
Sort by date Sort by votes
Look up the local DOT contracts and then use a factor of 1.3 for a large project or 2 for a small one. SMall being less than 500 feet. Extrapolate from 500 to 2000. I would call three contractors and ask them.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JamieHir
  • Locked
  • Question Question
Question about Paving Roads with a dip and tying in?
Replies
1
Views
3K
swazimatt
swazimatt
JAMFP
  • Locked
  • Question Question
Cost estimating software recommendation.
Replies
2
Views
520
bridgebuster
bridgebuster
Jc67roch
  • Locked
  • Question Question
Railroad "snap track"
Replies
2
Views
404
bimr
bimr
swooneyWOODSTRUCT
  • Locked
  • Question Question
"Professional" Experience Definition
Replies
8
Views
705
bimr
bimr
LOTE
  • Locked
  • Question Question
Retaining wall weep holes cannot "drain" to neighbor's property?
Replies
9
Views
1K
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top