Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

1.3 factor for development length using slipforms

Status
Not open for further replies.
asixth

asixth

Structural
Joined
Feb 27, 2008
Messages
1,333
Location
GB
Hi

Does anyone know the origins of why the development length has a 30% increase for walls built using slipform system and why it would be different than a conventionally formed wall? This is noted in AS3600 clause 13.1.2.2

Thanks
 
Status
Not open for further replies.

Similar threads

Vito11
  • Locked
  • Question Question
AS3600 - Development length around a curve
Replies
4
Views
876
rapt
rapt
bugbus
  • Locked
  • Question Question
Plate washers for oversize/slotted holes
Replies
7
Views
7K
PersonalProfile
PersonalProfile
Legoman92
  • Locked
  • Question Question
AS3600 Standard Cog Development
Replies
15
Views
3K
blihpandgeorge
blihpandgeorge
sdz
  • Locked
  • Question Question
AS1170.2:2021 - 5.4.3 Action combination factor (Kc)
Replies
0
Views
470
sdz
sdz
James_Gleeson
  • Locked
  • Question Question
Deflection Limits for Australian Flooring
Replies
8
Views
2K
mrlm
mrlm

Part and Inventory Search

Sponsor

Back
Top