Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. dkastz

    noob question about bearing forces in a gear pair

    hello colleagues, i am playing with MSC Adams machinery in order to learn it ...I have a example gear pair with shafts and "bearings". i have applied a torque and a "load" with user input mass Unfortunately i cannot retrive bearing forces... the values observed are not corresponding to...
  2. dkastz

    Basic excel parametric sweep

    ...its like i have a sheet with complicated calculations of an angle. i want to have 100 increment input and see (and store)the result position...
  3. dkastz

    Basic excel parametric sweep

    Hello colleagues I have a range of cells with input data. For each of it i want to put corresponding value into a calculations sheet and store the result into new range - how to do that with VBA ? thanx and kind regards
  4. dkastz

    working area of mechanism

    hello i need to find reachable area of a mechanism, can you suggest me how
  5. dkastz

    working area of mechanism

    hello how can i find reachable area of a mechanism within RBD
  6. dkastz

    how to see mass center in rbd

    hello again. please, answer me if you know i use ansys WB 16 and in rigid dynamics study i need to see mass center of an assembly thanx in advance
  7. dkastz

    how to see mass center in rbd

    Hello, how can i see mass center in rigid body dynamics analysis tack
  8. dkastz

    question about point mass and RBD

    Hello colleagues. I have a system of rigid bodies and my goal is monitor joint forces. The hard part is how to redefine the mass center of the existing geometry ? If it was the mass only it can be done easy with creating material with the proper density, but here mass center coordinates are...
  9. dkastz

    assign a s d w for pan

    Hej! I think i have asked this before, but just to be sure: I want to assign buttons a s d w for PAN THE VIEWPORT respectively left down right up ? Is it possible anyhow tack !
  10. dkastz

    simple "crane" problem

    mass and mass center distance to pivot are the same in both cases. only difference is in moments of inertia of the two bodies
  11. dkastz

    simple "crane" problem

    haha i wish a homework, but I am 31 now... it is a simplification of a more complex problem, my worries were if differently distributed mass has different moment of inertia around given axis, therefore the load capacity is different... or all depends from mass center location
  12. dkastz

    simple "crane" problem

    Dear friends I got stuck into simple crane problem, which deals moments and rotation around an axis. Imagine you have two “cranes” – with equal mass and similar dimensions W1 = W2 and L1 = L2, therefore only difference is in shape and thickness t1 and t2. Mass center of both is always in the...
  13. dkastz

    how to make a worm drive mating

    okay people, this is simple: i must model the worm drive as it is - with proper teeth meshing, exact axes distance and proper rotation and so on... How this can be done ? Mates, physical dynamics and so on - please explain it hope the attached file is ok

Part and Inventory Search