To be frank and blunt I'm not interested in good clean design using todays methods. It is as you have said a "grand timber framing project". But one that I don't want to break. Hence the effort on the engineering.
To help answer some of your questions. The two sides of the press are loaded...
Thanks for the time you have taken to respond.
Dealing with last first. Yes I have accounted for the dados. The cross sectional area of the posts required to resist the tension forces in the posts is ~9000mm2 per side. The posts are 150mm x 150mm with 65mm x 150mmm dados. That leaves a cross...
The tensile strength of the posts is more than adequate for the job so vertical bolts are not need for that reason.
However vertical bolts would help reduce the shear on the joints. The thing is vertical bolts are kind of hard to make look traditional or hide.
According my calcs there is...
Yes I can but I'm trying to keep it looking like a traditional press.
Having said that using steel to "repair" timber structures is a traditional practice.
That is the data I have on the species. The Southern Pine aggregate species you mention plus radiata and redwood I'll be using for the press.
Taken from Bootle http://trove.nla.gov.au/work/8697176
Based on that data the Slash is superior to the long leaf. And the radiata superior to the...
That is awesome help.
So what is the species for southern pine? Monterey pine is one of the most widely cultivated plantation species but getting information on it for large section timber framing applications is......challenging.
Hi Peoples,
Now I'm finally getting around to a project that has been on my to do list for ages.
We have been making cider from wild apples for about the last 6 years. As much as 500L per year.
Processing the apples is a huge job so eventually I made a scratter to speed the milling process...
I've got a bunch of the publications from the TFG but the most relevant two are:
http://www.tfguild.org/store/timber-frame-joinery-design-workbook
http://www.tfguild.org/store/timber-frame-joinery-design-volume-2
"It wouldn't be at the mid-point or anywhere else in the beam. You'd no longer...
Bearing in mind I'm still self teaching (as distinct from taught) structural engineer....
Timber framing manuals produced by the Timber Framing Guild recommend to ignore the effect of braces under tension.
So I don't think you can assume the point of inflection is centered in the beam. Rather...
@jdgengineer
I'm surprised that you would say that the limiting capacity is that between the knee brace and the post.
I guess it would depend on the joint. If it were a beam tennoned into a post then that could makes sense. I still would have thought that the tenon or the peg/s would have...
Knees braces are used to prevent a post and beam frame from wracking under lateral loads. Everyone knows that.
But just adding knee braces where ever isn't a solution. The size of the knee brace (as in its length) makes a big difference.
The longer the knee brace the more it protrudes into...
Here is a case that is neat in terms of pipe layout but seems like a bad idea.
M=manifolds 225mm
I=inlet 100mm
O=outlet 65mm
I
I
O O I O
O O I O
MMMMMMMMMMM
O O O
O...
Ok after being urged not to worry about this I am again.
Ive been told by my flow meter supplier that in order for them to work accurately I need 10 diameters of straight pipe before and 5 diameters after in order for there to be a stable velocity profile. This got me thinking that if I have...
Appreciate the need to understand what you are doing. Following the instructions in the PVHB I feel I could do the designs in steal but we have access to a lot of timber relatively cheaply. I really need to learn how to do these calculations myself. If I have to employ an appropriate engineer it...
Im trying to design a rectangular tank.
Using the method in eugene what is name "pressure vessel handbook" ive got the formulas I need but the book is for steel and gives a max stress value of 13 tho or so (from memory). Can anyone tell me the value to use for wood? If I can work it out from...
Thinking about this some more if the distance of the outlet spacing doesn't matter just that the pressure differential be large then it would also follow that the eveness of the outlet spacing doesn't matter either?