Menu -> Information -> Shortcut Keys will give a list of all keyboard shortcuts in the information window.
Anthony Galante
Senior Support Engineer
NX9 to NX2306 (14 versions) installed.
Install NX, when prompted for a license server, enter in the full path & filename of your license file.
e.g: c:\licensefiles\licensefile.lic (the file extension can be .txt, .dat or .lic it doesn't matter as it's a text file anyway).
Also make sure that this license file is put in a location...
When you've done a search, switch to the Search tab (see image) and make sure it's displaying Commands, not All.
This will then show the path to the command and make it available if it's in the role you are using.
Anthony Galante
Senior Support Engineer
NX9 to NX2212 (13 versions)
It was removed as of NX1926:
The common Wave context commands had been removed from the modeling object sensitive context menus in NX1926, e.g. <Link to Work Part> or <Link and Extrude>.
According to Development, shortcut toolbars, menus, and radials have grown a bit out of control so they...
In regards to tokens, not all functions are available via token licensing.
In Crocostimpy's case, they would need nx_freeform_2 to use Blend Corner.
This isn't covered by tokens.
Menu -> Help -> About NX, then scroll down the information window that appears.
There will be a section for NX...
You can't change the history palette on it's own, it's contained in the file history.pax which lives in your user profile.
Below is copied from the help:
Changing the default directory of user customization files
If you want to use user-defined customization files saved on your system, point...
I tested in NX2027.3102 and NX2027.4060.
It works properly in NX2027.4060 so I presume it's a bug in the earlier release.
Anthony Galante
Senior Support Engineer
NX9 to NX2212 (13 versions)
I just tested in NX2027.4060 and the results are correct, the results between the popup & the information window are the same.
Anthony Galante
Senior Support Engineer
NX9 to NX2212 (13 versions)
I just tested in the same, older (NX9) & newer versions (NX2212) and all are the same.
To use Blend Corner, you need nx_freeform_2 in your license/bundle. NX91110 is a Mach 1 Design Bundle and has never had that as part of the bundle.
If you used Blend Corner previously and it worked, it's more...
@Paotr
If you're able to, upload the file here I can take a look at it.
Otherwise I can arrange a link for you to upload to.
Anthony Galante
Senior Support Engineer
NX9 to NX2212 (13 versions)
@Paotr
I understand that your issue is that when you do a fit, it zooms out from what you're working on? The planes you refer to are just a way of seeing where the origin is.
Did you try the suggestion #9 in the PDF you refer to (I wrote that by the way).
What I would suggest is to switch...
Attached is a Excel file (with a macro built in) which will create a Assembly Clone log file. This log file can be used with the clone dialog in NX, to specify the names for parts when cloning.
There's a Powerpoint that goes with it.
I didn't create it, but found it a few years back.
To me...
@moog3
I think what you're after is the See-Thru Style (see image) in Preferences -> Visualisation, there's 3 options to try.
Anthony Galante
Senior Support Engineer
NX9 to NX2212 (13 versions)
Don't select the command. Instead click the magnifying glass in the search bar, this will bring up the new search.
Change the selection from All to Commands, then highlight the command and it will show where in the menu or toolbar it can be found (see image).
Anthony Galante
Senior Support...
The body type option for Solid or Sheet is on the dialog under settings.
It may be hidden from the dialog.
If you use the gear in the top left of the dialog, you can show collapsed groups, then expand the setting section (see image below).
You could also try resetting the dialog using the...
The filetype setting looks correct. I would suggest running a repair of the NX installation (from the Windows Program & Features).
If that doesn't fix it, I would look at updating to a later update for NX1953 (the last was NX1973).
Anthony Galante
Senior Support Engineer
NX9 to NX2008 (11...
I made a video a few years back when NX1899 was released, showing how to put the mass on a drawing.
I've been meaning to update based on questions I had gotten and have finally done so.
I've updated the FAQ on Eng-Tips where this is listed: https://www.eng-tips.com/faqs.cfm?fid=2086
Video was...
Update your graphics card driver.
If you can find your computer or graphics card in this spreadsheet from Siemens, use the driver linked there: https://support.sw.siemens.com/kbassets/PL8017193/NX-Graphics-Certification-Table.xlsx
If not, you're most likely running an uncertified card, so will...