Search results for query: *

Hi all, I am creating a BOM Table with repeat regions for some drawing templates. One column, the description column, tends to have more text than I can fit in a single line of the table. I would rather not increase the width of the table, so I would like the table to automatically increase the...

We'll be operating at a steady stat temperature between 60-80C. The cell will be very well insulated. I'm not familiar with the bolt coatings you mentioned. Where can I find more information on this? (Vendor, requirements, properties etc)

Dogtop, Yes. The endplates are isolated, so that is not of a concern. Desertfox, The aluminum offers us lower cost or material and machining, lower weight, and far superior thermal conductivity. This is important because heating elements will be applied to the two end plates to bring the...

Yes. They are bored through because there are electrode connectors in there that require wire leads, which will run out of the cell.

Hello all, I've been working on a design of an analytical electrochemical cell. The basic design involves a stack of 4 plates, 2 end plates, a graphite counter-electrode plate and a garolite electrode plate. In the center of these plates resides a thin teflon-gasketed catalyst membrane layer...

Hello all, I am working on an array reactor cell, which involves a stack of plates which are bolted together. Flatness and parallellism are highly desirable for uniform compression across the reactor membrane. I am new to geometric tolerancing, and I would like to know what a reasonable...

Unclesyd, it sounds like you had a very similar situation as I do. If you don't mind telling me, did you employ a rectangular or circular bolt pattern on your assembly? After some further digging through my textbooks I definitely see the benefits to your other suggestions, but I am still unable...

Hello all, I am currently in the process of designing an analytical fuel cell. This assembly consists basically of several square blocks of various materials, stacked on top of one another and held together by a series of bolts which seat on the top plate and thread into the bottom plate. The...

Problem solved. I changed the title block to a series of tables, and the problem resolved itself. Thanks dgallup

I have entered them as text into the title block. For instance, in the title block I have included .xx = &linear_tol_0_00 .xxx = &linear_tol_0_000 .xxxx = &linear_tol_0_0000 &model_name &scale These have all worked as expected. However, and user defined parameters that I have...

You're right. Sorry for the misnomer. What I have been using is a drawing format. I took a default format, renamed it, and modified it as necessary. I'm still having the same problems as described above.

Hello, I am a pretty experienced Pro-E user, but I have just moved to a new job in which I am the first mechanical engineer at the company, let alone the first Pro-E user. I want to get some part, assembly, and drawing templates set up and I am having some trouble. For one thing, when I am...