Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: aas1
  • Order by date
  1. aas1

    Saving Level names in Ver. 7

    Level names must be saved in a .lvl file. You can do this under Level Names>File>Save. The .lvl file is also a text file that can be edited in Notepad. Once you have saved the .lvl file use "Save Settings" to save the attached .lvl file to your design file. Hope this helps.
  2. aas1

    Quick way of deleting alternate rows

    ASAP-utilities.com has a free application add-in that is pretty cool that automates many routine tasks in EXCEL. You should check it out.
  3. aas1

    3d microstation - mapping a sky to fill entire background of a drawing

    Bentley has discussion groups set up for all of their products which they check regularly and answer questions just like the ones you are asking. They are quite helpful. You can find the disussion groups at: http://discussion.bentley.com/
  4. aas1

    Re-scale cells

    Any macros that worked in V7 should work in V8. Just add copy it to the Program Files\Bentley\Workspace\Standards\Macro folder on your harddrive.
  5. aas1

    Re-scale cells

    Cadgurus.com has a free macro called "cell2scale" that may be useful.
  6. aas1

    Maximum grade to prevent drag boat trailers

    Thanks to all of the responses. What I am proposing is about 250' of construction with reverse 100' vertical curves and a 4.25% grade between the PI's. I like the idea about making a template and "driving" it through the intersection. I have since found that my office has addressed...
  7. aas1

    Maximum grade to prevent drag boat trailers

    I am raising the grade of a rural collector road to improve sight distance at a T intersection with a local road. I am raising the grade approximately 3.5' and would like to minimize the construction on the local road which dead ends and services an island where every property owner has a boat...
  8. aas1

    11 x 17 issues with pdf and tif files

    Had this problem just yesterday. We rotated the .pdf clockwise and it printed just fine.
  9. aas1

    WRITE LOCK PROBLEMS!

    Just a thought - you might want to make sure that all service packs are installed for InRoads 8.2. We had a similar problem placing cells with InRoads 8.1 that was resolved when we upgraded to InRoads 8.2 and with service pack 6.
  10. aas1

    Tag2Text.ba

    Where did you get the macro and what does it do?
  11. aas1

    Batch Plotting Archive Drawings

    Interplot Organizer is software that works outside of Microstation to plot Microstation drawings using Iplot. It will allow you to define your plot area by x,y,z coordinates
  12. aas1

    Microstation - Reference files

    Thanks, that was quite helpful.
  13. aas1

    Translating Acad command in Microstation

    Go to help and search for "key-in scripts".
  14. aas1

    troubles: can't open microstation file!!!!!!!!

    An easier way to do what mjflorio suggested is to create a new blank 3D file and MERGE in the data from the corrupted file. This command is found on the Microstation Manager toolbox under "File". This ensures that all data is merged to the correct location in the file.
  15. aas1

    Placing a fence in a 3D seed file

    In Microstation Versions J and later there is no feature to maintain a fence in a 3D file when you pan around. Microstation V8 has added the "fence persistance" as they call it to 3D files.
  16. aas1

    Curve length

    The formulas for horizontal curves (English units) are: R = 5729.578/D T = Rtan(delta/2) and L = 100(delta/D) R = radius (ft.) D = degree of curve (DMS) T = tangent length (ft.) delta = angle between forward and back tangents (DMS) L = length of curve (ft.) Find T by subtracting the station...
  17. aas1

    Microstation - Reference files

    I have about 180 design files that each have the same 4 reference files attached. I need to change the logical name of each reference file in every design file. Does anyone know of a macro that will do this?

Part and Inventory Search

Back
Top