Search results for query: *

Hi NXers Our old HTC vive VR headset is really dated now, I've just tried using the latest HP Reverb G2 only to find that it's not currently supported by Siemens. Ideally I want one that doesn't need to the two sensors that are mointed on tripods so I can use it sat at my desk. Can anyone...

Quick question, I have a customer who is struggling to get components to show in a formboard drawing, we soon realised he needed to sub-divide the spline paths at a clamps RCP in order for it to be included in the formboard, but there are some connectors that are also not showing in the...

Have a look at the attached model If you change P7 to 180 then the blends will suppress, anything less than 180 and the blends will be unsupressed. Cheers Si Best regards Si NX7.5 NX8.5 NX9 NX10 NX11 NX12 NX1847 Technical Manager- Design www.oneplm.com...

Hi NXer's I have attached a folder containing two parts that have both been saved in exactly the same state in NX12 and in NX1899 along with a video showing the issue which I'll explain. A customer has recently upgraded to NX1899 from NX12 and they have brought to out attention that in...

Hi Jerry I saw that already and it doesn't really give me what I need. I want to be able to go tools> materials > Assign Material and when I assign Steel to a part, it sets it's color to 171 (medium midnight) and when I assign stainless steel to another part, it assigns color 50 (ash grey). I...

Hi NX'ers I know there has been a few posts around this topic in the past, but would anyone happen to know what to add to the physicalmateriallibrary.xml so that when a material is assigned, a colour is also applied to the part. Please note that I don't mean materials that relate to rendering...

Thanks Tomas, makes sense :) Best regards Si NX7.5 NX8.5 NX9 NX10 NX11 NX12 Technical Manager One PLM Ltd. (Formerly Majenta and Cutting Edge Solutions)

HI mmauldin Thanks for the examples, I'm struggling to see how to get the Zt to alter in the second example, what do you need to change edit the amplitude as the wave in the law curve sketch is defined by p10? What does that huge expression for zt actually control and how do you make it take...

Hi All Would anyone be able to help me with the expressions I would need to define a law curve with the same form (size not that important) as the attached example please? Many thanks in advance. Best regards Si NX7.5 NX8.5 NX9 NX10 NX11 NX12 Technical Manager One PLM Ltd. (Formerly...

here is a simplified version, it's been done in NX11 as the forming and flattening tools were not available until this release. Si Best regards Simon NX7.5 NX8.5 NX9 NX10 NX11 NX12 Senior NX Consultant...

It nothing to do with resolution, it looks like it's to do with the way the forming and flattening tool wraps the curves on to the model.Thanks for all your help and suggestion, however it seems that we have part that is asking beyond the limitations of the tool. Cheers Si Best regards Simon...

I've used NX/UG for nearly 20 years, I love it, I have fought it's corner in battles with Catia and Pro-E users time after time, I love so muhc of the new functionality and what the team at Siemens has done with the interface and usability, but, but, I have to say, the new measure tool is...

Hi Cowski, Tried all of that and no joy. Best regards Simon NX7.5 NX8.5 NX9 NX10 NX11 NX12 Senior NX Consultant www.team-eng.com

Hi John Long time! Nope, Ive tried all sorts of settings, from update display to regenerate work, to visualisation preferences and nothing seems to work. Many thanks Si. Best regards Simon NX7.5 NX8.5 NX9 NX10 NX11 NX12 Senior NX Consultant www.team-eng.com

in the attached image, all the faces that the blue arrows point to should actually look like the ones that the red arrows point to, in other words all tangential radii. This is a really small model, the rad is only 0.2 mm, the blends are created in a sketch and then wrapped on to the surface of...

I love the new measurement feature for the record. Takes a bit of getting used to, but its well thought out and very well executed, however, having said that, its missing some key functionality I've noticed since posting this. 1: Measure minimum distance local is not supported 2: CoG is given...

thanks for the replies, but I already know all about remembered constraints, my issue is the difference in behavior between NX11 and NX12. If I add a component in NX11 that has remembered constraints saved, and I choose the positioning method as being either Absolute or Move then the component...

Hi all, Is there, or has there ever been a setting (apart from the one relating to reusable components in the customer defaults) that relates to Remembered Assembly Constraints so that they can be turned off when adding parts that have had them saved so someone can choose to use their own...

@nutace They are all new parts. @toost Yes I fully agree, some of the menu commands are just to slow to be acceptable, not sure what has gone on. Best regards Simon NX7.5 NX8.5 NX9 NX10 NX11 NX Consultant www.team-eng.com

Has anyone noticed that NX12 seems to be slower when performing simple tasks? things like using the undo function seems to take more time than it should, even on simple models. I've just had an assembly where I performed a "show only" command on component and NX12 took an age to complete the...