sorry, thought it was the x-axis only. You could probably go with a piggy back set-up, one cylinder mounted perpendicular to the other if you have the room. Alterntavily, try Festo.
Try the DGE series of Festo linear slides. Used them on a job recently to apply glue to the inside of a bore. They werk well. You can contact me directly if you need more assistance.
Hi all,
I work for a machine building company. We've built a hydraulic lifting machine for lifting a product (long copper bars weighing up to 200kg). The setup is as follows:
1.There are two carriages on either end of a mild steel frame. One of the carriages is fixed and the other is sliding...
What exaclt does the term "Positive Acting Interlock" mean?
I'm using interlocks on 2 of the doors of machine. If a door is openend power to the machine is cut off. Does this mean they are positively acting interlocks?
Hi all,
We got in some 1/8" BSP helicoils, 1/4 inch long, recently but we thing they're the wrong size. Doe sanyone know what they're ID should be?
God bless,
Phil.
Have a manual for another machine for The States. t's a repeat job and one of the old engineers did it up so I just copied it (few minor changes only required).
Are there any documents in particular that are required for The States?
Also. can you clarify what you mean by including a section...
Hi all,
I'm a mechanical design engineer and I've finished a machine for moving toothbrushes from one conveyor to another. I need to write up a manual which needs to include the following:
1: Introduction (how machine works)
2: Installation and Commissioning
3: De-commissioning & Disposal...
Hi all,
I want the display style of an isometric view of an assembly to be shaded with edges but it won't allow this. It's only shaded even though shaded with edges is selected.. I've gone back into the assembly file and made sure that there are no problems and it seems fine.
How can I fix...
Hi all,
Just want to find out about diffeerent types of couplings and when and where they are used. Bellows couplings are used on servo motors? Is this because the shaft is changing rotation directions continuously.
What other types of couplings are available and where might they be used...
Hi Gonzalo,
I don't think our customer would appreciate me uploading their files to the net so I'd better not.
Can I download a trial version of that program? Tried there website but there doesn't seem to be anything available.
God bless,
Phil.
Hi all,
These are the 4 programs I've tried unsuccessfully:
gerbv -2.0.1
GC-Prevue
Viewmate
P-CAD 2006 Viewer
I tried renaming the .gbx file extension to a .pcb file but it didn't recognise it.
http://www.gerber-viewer.com/ seems to be the clearest but I'd like to be able to view these...
Hi all,
I've downloaded GC-Prevue but it doesn't open .GBX files.
Comcokid - you mentioned something about renaming the extension. I've tried this (renamed the extension as a .GBK etc but to no avail.
I've just downloaded Gerbv - 2.0.1 but that doesn't seem to open the files either...
Hi all,
I'm looking for software (preferably freeware) to open files with a .GBX file extension.
We received files from customers that are of this format and unfortunately we can't open them. I did a search on google for the file extension .GBX and it came back to me recommending Pentalogix...
Hi all,
Our customer has sent us on Inventor Part files (.ipt) and we are unable to open them in Solidworks. They're using the latest version of Inventor and we're using SW2008 SP3.0
I've downloaded the latest version of Autodesk Design Review and I'm still unable to open this part. Can...
Can somebody tell me the difference between a Roll Tap and a normal Tap. Does a roll tap not produce swarf. I've read that somewehere but surely some swarf has to be present or else there would be no thread??
God bless,
Phil.
