Handleman,
Thank you very much!! I guess I was trying to cheat a little in name descriptions and forgot it would give me issues like that! This solved my problem!
Cheers!
Hi all,
I am having a dillema in that I am not getting the correct output for the Evaluated Value. I have created an equation NOM_QTY=CutLength/12. Note the CutLength changes for different configurations. I have attached a picture with my problem. The value in the example should be '6.10914'...
I have been searching on Eng Tips and google looking for a macro or some way to add revisions without adding the lines for that revision.
The reason is I have a predefined revision box in the bottom left corner within my titleblock and want to be able to just add the text that a revision adds...
Thanks ATDENGINEERING,
I figured as much, being that I had tried pretty much everything to make it smaller. I just was double checking in case I missed something.
I am wondering if anyone has a solution for weld symbol sizing? I have done a search and came up with a couple searches thread559-136847 being one and have the same problem described, the weld symbols are to long and I would like to shorten them. The scaling is correct, its just the length is a...
Thanks CBL,
I actually used the wrap feature to position the points in the places where I wanted them for hole wizard. I accomplished what I was after, thanks once again.
Cheers!
So I have came back to this dillemma.
I am having a brain fart and can't recall which feature would use the axial position being controlled by dimensions from a face, and radial positions controlled by relations with an upper level sketch with radial lines, if I have already created a hole in...
There are 116 holes.
I guess I was looking at doing it differently than what you just mentioned about controlling them from a face and radial positions!
Here is a image file to check out
http://img5.imageshack.us/img5/7606/shell.jpg
I tried using the Temporary Axis of the holes but unfortunately in the folded state the Temporary Axis does not show up. It does show up in the unfolded state however.
I added the holes in the unfolded state because the hole pattern is non-uniform and I had a dxf pattern that I just placed on...
Thanks for the reply,
I am inserting the pin at the assy level.
Ahh yes, I can see that my mating would probably have an effect on this. I originally mated the pin in the folded position. I placed a angle, tangent and dist from top of SM part.
I have tried other mates in the folded and...
I have created a circular sheet metal part and used fold/unfold plus hole wizard to place holes where I would like pins to be placed. The holes aren't in any pattern, they are located strategically to miss other holes. I have tried in an assy to use feature driven pattern to place the pins, but...
Hello all,
First of all I tried doing a search looking for help with this error bu was unable to find anything.
The error I am getting is...
"An existing part file with the same name but belonging to another family has been found in the Content Center files location. This happens when more...
CBL and Eric,
I tried the .exe on a computer which did not have any eDrawing package on it and I was still able to move stuff unfortunately.
mattarr,
I thought of sending a 3D pdf file to the customer, however those files can get fairly large. Also the customer, if they do not have the proper...
Thanks for the reply,
Yes I can use it. I have eDrawings Professional.
The reason I wish to disable it is, I believe it is in the best interest of the customer and myself. They will move a part out of place, and although I know you can hit the home button and everything goes back to place, I...
I am looking to disable the Move Tool in eDrawing 2007 sp02, as I thought previously we were able to disable this tool.
I have done a search and unless I am typing in the wrong search keywords, am unable to find what I am looking for.
If someone can point me in the right direction or enlighten...
