Hi,
Is it possible to find out the element numbers associated with a particular volume, for example in a series of ten volumes, the element numbers assigned to elements making up volume number 3. I can find the number of elements with the list command just not the numbering which ANSYS has...
I want to apply a load to each section sequentially as per a *DO loop, as the loop increments sequentially I wanted the areas to be similarly sequential, basically to save time...
I am modelling in the cylindrical coordinate system and have created a series of areas which require gluing together. However post issuing the AGLUE command, ANSYS assigns a number from the end of the list to the areas positioned at 90, 180 and 270 degrees, even after a NUMCMP command. This...
Hi,
I need to be able to read a temperature from a given point in a body, then reapply this temperature to the model surface as a loop, does anyone know of a method for achieving this?
I am looking at CBN wheels, I have been trialling a normal distribution technique from Hou and Komanduri in the journal of machine tools and manufacture, which gives some strange results at high removal rates. If you could point me to the paper you have been looking at I would be grateful....
Hi,
I need a method of calculating/predicting the active grain density on the grinding wheel for predictive modelling work.
Any help would be gratefully received..
Hi,
I am looking for a source of isothermal transformation and phase diagrams for the following materials:
51CrV4
38MnSiV6
Austempered Ductile Iron
If anyone knows where I might find these I would be grateful...
I am using the SFE command as part of a do loop, the convection is applied to the whole line, when the do loop runs, the convection is turned off as the heat flux is applied to the individual elements. Therefore there is no convection after the first heat flux is applied.
Hope this makes sense.....
Hi,
I don't seem to be able to apply convection and a heat flux to a surface simultaneously in ANSYS, as per machining with coolant. The current model is a transient heat source, so the heat flux is reapplied in a do loop to a new element in every step. Any sugestions would be gratefully received.
