Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Bridging in vibratory feeding of cans
To bklauba, We have installed a spring wire finger attached to one of the vibrator mounting screws in the vicinity of the jamming. It appeared to work once in the shop but didn't work when we tried to use it in production. We do not have a ridge at the bottom of the can like you would see on...- cheapshot
- Post #8
- Forum: Mechanical Acoustics/Vibration engineering
-
Bridging in vibratory feeding of cans
In response to bklauba, this system is new. The pan or tray has one inch sides and can be loaded with about 30 cans with toweletts already in place ready for solvent to be dispensed into them. The trick is to get the cans to flow to the narrow end of the tray and glide onto a small conveyor...- cheapshot
- Post #4
- Forum: Mechanical Acoustics/Vibration engineering
-
Bridging in vibratory feeding of cans
I am attempting to feed " tuna style " cans from a vibrating stainless tray mounted on a pivot to produce a ramp, onto a conveyor. The tray is a right triangle with a base of 36 inches and a side adjacent of 48 inches. A four inch opening at the top allows the cans to flow out. The cans will...- cheapshot
- Thread
- Replies: 8
- Forum: Mechanical Acoustics/Vibration engineering
