Tikito,
Can you post a screenshot of a typical tree you might see? We use hybrid design but more because that's what we learned (also aerospace) so I'm curious to see.
Also - if we disable hybrid design, what will happen when we open a file that was made with hybrid design enabled?
We've setup a few of our standard files for threads, so no problem there. I'm just wondering if there is a way to make the drop-down box by default select one of our standards? For instance, in the attached JPG image, when we go to put a hole in, we first have to check the "Threaded" box...
Hi everyone - sorry I haven't responded sooner, forgot about this thread actually! Thanks for all the helpful suggestions, I am an admin but didn't know exactly where to look for this setting. Weavedreamer's suggestion was spot on - the spacing percentage was set to zero for text notes but for...
Hello,
We are using a modified ANXI.xml drafting standard and I'm sure this must be an option somewhere, but basically when we place a cumulate (ordinate) dimension, and then just place regular text, the spacing is not lining up. See attached .jpg for a screenshot of this. You can see the...
Is there any way in CATIA, or with an add-in, that will allow the saving of a 3D pdf file?
Solidworks now has this option built in, and it is as easy as file... save as... pdf, and check the "3d" box and you get a pdf file that can be zoomed and rotated etc... This is very handy for...
Just to add to what Jackk said, you can also do this right from the get go when placing new views, for cases where you have all the different bodies in one CATPart. For example: Place new front view, window over to your 3D part, but BEFORE selecting anything, pick the part bodies in the tree...
Jackk,
Thanks for the response. Is the FT&A a separate workbench (separate license) required in order to dimension and put GD&T on the 3D model? We currently have HD2 (Hybrid Design) with Part Design/Generative Shape Design/Assembly and I know we can put text leaders on the model, but I'm...
What you're asking can definitely be done in catia. We use ordinate dimensions all the time. Try playing around with some options in tools...standards...drafting. If I remember there's a category for cumulative dimensions. Once you get it set you can use that drafting standard for all new...
Hello,
Just wondering if there is an "equivalent" to solidworks hole wizard callouts in CATIA drafting mode. For instance, with one click, solidworks drafting will give you the hole size and depth, and any associated counterbores etc... and even the number of holes (if they were done as a...
Also be careful when using the "project elements" or "intersect elements" while in sketcher. While this will allow you to "snap" to an existing feature, sometimes this causes a lot of headaches later on. For example, if you project a surface, then later on come back and change that surface...
Definitely try Doug's suggestion, as this sounds like a graphics card driver issue to me. I'm unfamiliar with the link Doug posted, but you may want to check NVIDIA's site. Choose driver and fill in your specs, and under download type make sure to select partner certified driver, then on the...
If the .model contained drawing sheets, it could be true that information was lost. A .stp file will only bring across geometry, as you figured out.
If you want to get around it... get Catia. If you want to work for Boeing, get Catia.
Hello,
We are looking at an application of subsequent forming of aluminum tubes, 3004 alloy, H22 temper. Where can I find elongation data for this material?
The approx geometry will be about 6" diameter x .030 inches thick wall (before forming).
If needed, can we anneal the part before...
I've had pretty much the same experience. Its really not downward compatible, as they claim, it just gives you a dumb solid you can't do anything with.
Again, I haven't tried it much but when I have its always given me a dumb solid.
It might be that the "half dimension" option is checked. I'm not sure what this option is there for, but when you are dimensioning, BEFORE placing the dimension if you right-click you should be able to un-check the half dimension option.
I used to try to file them by project or customer, but that didn't work too well so I quickly moved on.
Now I use a different system. Everything in outlook is in my inbox or my sentbox. all other folders are emptied on a regular basis.
Every half-year I log all the messages to a new...