Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. PECPESC

    WinHydro

    WINhydro was written by Don Grisham PE/RPLS/CPESC Contact: Don Grisham, Software Developer P.O. Box 550171 Dallas, TX 75355 Also owns A&G Software which has other programs w/McTrans. Can provide demo if written request.
  2. PECPESC

    spreadsheet applications

    WINhydro was written by Don Grisham, Software Developer P.O. Box 550171 Dallas, TX 75355 Also owns A&G Software which has other programs w/McTrans. Can provide demo if written request.
  3. PECPESC

    spreadsheet applications

    You might try WINhydro from McTrans (Univ. of Fla) http://mctrans.ce.ufl.edu/
  4. PECPESC

    '97 UBC Fig. 18-I-1 Setback Dimensions

    Is H/3 not the distance from the top of slope to the beginning of the foundation? Unless otherwise allowed by geotech?
  5. PECPESC

    Storm water ventilation

    Inlets on the system should be upgrade from the storm main and should let most of the air escape. Anything remaining should escape through the lift holes in the manhole covers.
  6. PECPESC

    scour

    Typically scour occurs at bridges or other structures. The Federal Highway Administration Hydraulic Engineering Circular No. 18 (HEC-18) is titled "Evaluating Scour at Bridges". The program HY-9 performs calculations based on HEC-18. They also have Hydraulic Engineering Circular No. 20...
  7. PECPESC

    Inverted siphon ?

    Can U not add a manhole just upsteam of the 20" water and change the grade as U cross the thoroughfare? ie:steepen the slope on the upstream side & flatten the downstream side ?
  8. PECPESC

    Stabilized Construction Entrance Steel Grate

    One solution is to use a prefab cattle crossing section. This is even better than the corrugated metal and can also be used as a washdown area w/sump. Can be moved from job to job. Check this site for details. Wings can be deleted for construction entrance...
  9. PECPESC

    Convert CN's to Rational C's

    Iha has the correct solution. Rossmillers formula was developed by Ron Rossmiller, formerly of Univ. of Iowa. I have included it in my software for use in the rational formula method for computing runoff and call it, of course, Rossmiller Rational. CN in the main formula is computed by the...
  10. PECPESC

    Storm Water Pollution Prevention

    Texas TNRCC has been renamed Texas Commission on Environmental Quality (TCEQ). They have been delegated the responsibility to enforce the Phase II regulations in Texas. They have issued the TPDES General Permit TXR150000 (Construction) that is fairly definitive of what is required for SWPPP's...
  11. PECPESC

    Retention Basin

    Must compare pre-developed to post-developed and you may have to store the difference in volume. If detention, you usually can release it at a max. rate = to the pre-developed rate. If retention, you cannot release it at all. More than likely you want detention. The I of 2.85 sounds awful low...
  12. PECPESC

    RCP Pipe Sizes

    Here in Dallas, Texas 21, 27 & 33 are common and very available.
  13. PECPESC

    HGL FOR A FAILING STORM WATER SYSTEM

    I think what everyone is overlooking is the fact that what the client wants to do may violate the Phase II requirements of the Clean Water Act. Check the NPDES permit requiremnts for the municipality.
  14. PECPESC

    inlet stone capacity

    There are basically three types of inlets. Throat, grate and combination which has a throat & a grate. Just treat the design as a normal combination inlet. There is a lot of info available for design of combination inlets. Here is one source http://www.wrpllc.com/books/udinlet.html
  15. PECPESC

    flat area hgl

    Again, in Dallas, Texas, all storm drains are designed for the 100 year event. They formerly used a lesser event but that changed several years ago. 36" & 48" pipes in 100 lot subdivisions are not uncommon. It all depends on your local requirements.
  16. PECPESC

    Storm drain Pipes

    If reinf. conc. pipe, the manufacturer can tell you how much deflection you can get with his pipe. A 24" RCP can be laid with a 140' radius. If you use radius pipe, it may be as small as a 65' radius. If you use a "pulled" radius pipe, 40' Get a catalog from Hanson pipe. It has...
  17. PECPESC

    inlet stone capacity

    What is "inlet stone capacity" ? I am unfamiliar with that term.
  18. PECPESC

    TR-55 Time of Concentration assumptions

    You might try using the average slope of a run of pipe or channel and determine the approx. velocity. Assume the shortest routing to be on the consertative side as far as discharge. Divide the length of the run by that value and get the travel time. You will then add that to your overland flow...
  19. PECPESC

    flat area hgl

    In Dallas, Texas they require that the HGL be at least 0.5' below the throat of any inlet using the 100 yr event.
  20. PECPESC

    Formula for number of shaker plates to use in entrance

    Large stone 6"-12" dia.placed on geotech fabric works real well.

Part and Inventory Search

Back
Top