@unclesyd
Thanks for the info. That company looks like the UK division of Oxford laser for which we've spoken with. It sounds like they do great work but not at a price we can afford to product the product.
@tyerdawg
Thanks for the concern. Our prints have all the details on them including...
We're trying to determine what laser technology is required for the high speed pierecing of thin metals. Our application calls for 0.004" hole in both 6061 and CRS of thicknesses varying from 0.015-0.025.
From several RFQs and respective quotes, we've learned that many if not most laser...
Thanks all.
I've got some Vespel on order. I'm hoping that it will be a seamless replacement and we'll be back up and running.
Engineering Incredible Solutions
www.incredilution.com
You're right, that looks very similar and would definitely work.
Mcmaster says its over $70/inch ... wow. Guess this project isn't going to be cheap.
Engineering Incredible Solutions
www.incredilution.com
Problem:
So I recently purchased an FDM 2000 3D printer. It was very neat when it was working. I had to reload the material and noticed the head was leaking (from previous owner) creating a huge ball of plastic. I knew the problem would only get worse so I disassembled it.
The picture shows...
Can you tell us anymore about the output specs of the generator?
I'm not sure if you're telling us the output of the generator or the output you'd like from the voltage regulator. Can you give us both?
Engineering Incredible Solutions
www.incredilution.com
There are a million different ways of doing what you're asking. You need to determine which is the best for your application. To get you started check out these:
http://www.maxim-ic.com/appnotes.cfm/an_pk/3965
http://focus.ti.com/lit/an/slaa129b/slaa129b.pdf...
I need to do some testing with a power supply that simulates the power utilized in Germany. I need it to be as close to perfect as possible. I'm looking for a converter that is affordable. I've seen inverters but I'd prefer something that ran off of US 120V 60Hz line power. I found one that...
VE1BLL & Skogsgurra
I knew I posted on here for a reason. A combination of what LionelHutz and VE1BLL said would make for a mean little controller.
With this I could even have say some kind of input (hall effect) to change the total power output for other future products or if the customer...
Hi Gunnar,
I am not aware of any PF requirements in the US. We have harmonic current requirements but I believe it is for applications consuming > 75W.
Can you point me to some material I can read regarding EU/CE requirements for PF and harmonic current?
LionelHutz,
You have an excellent...
I guess I should elaborate more. The solution must be under $15 so that eliminates every commercial 48V supply I've come across. I've discussed high volume pricing with a manufacturer of a nice 48V supply but they just cannot come close to my target.
My quantities are 10k+ so it is affordable...
Power is actually the most important. I am looking for a temperature rise from ambient not necessarily a certain temperature.
The power level is approx 35W. The time constant is a few minutes as its rather large.
My voltage is the worldwide range, I just neglected to mention it for reasons...
Gentlemen,
I am not a power guy and I'm struggling trying to find a solution to my problem. I need a circuit that will allow me to adjust its power to a fixed resistive load. The input MUST be capable of 100-240V AC and the output power must be consistent throughout the input range.
My...
So recently I've seen several devices that have a pretty neat way of interfacing with most modern day combustion engines. Instead of complicating the installation of a device with having to find an RPM pickup to splice into(coil trigger, engine position sensor, etc) several manufacturers are...
Well folks... I thought I'd revisit this post and give everyone a thanks!!
I took the information I found here along with a few articles and books I read and went forth with my redesign.
FCC results are in and we've lowered our noise to 3dB ABOVE the maximum allowable by FCC for only a few...
I would like to know more about this...
Does anyone know what company prints these type of labels that are voltage activated?
Does anyone know what technology they're using?
I've tried looking around but have no idea where to start.
TIA
I Haven't checked this in a while, sorry for the delay. I want to thank everyone for their comments and suggestions!!
On to the party...
MikeHalloran: I hope you're wrong but assume you have plenty of experience. I just sent off a box that had been sprayed and has sheilded cables. If we...
We did a few simple things such as insuring the data bus was burried between two copper plane layers (vcc and gnd) along with the clock. Additionally we tried to keep bus lines as short as possible and away from analog and i/o lines. No one ever mentioned terminating the bus lines, bus...
Turns out the scope i'm using is only 100Mhz and i'm sure you know the rest.
Apparently we dont own a >100Mhz scope (yet :))
It'd be nice to be able to see the clock but i'm not sure how much I could disern.