Search results for query: *

Dear Try deep drilling http://www.deepdrill.nl/Products+and+Services/Deep+Drill+Tubulars+BV/Drill+pipe+_+collars Best Regards

You must use technology Hot Joggling. This is bending by teperature 150-190 degree Celsius. If you are inrterested in this technology send reply. Regards libor

Dear Cajid there are two ways, You can Dry ice with pressure air. This is Standard striping technology for aerospace painting. Second look and try this striper. http://www.aerospace.chemetall.com/pdf/tds-nsolvfn-05-02-17.pdf Good luck. Libor

May be helpfull for you http://www.novator.nu/ Regards Libor Pírko

Try www.handtmann.de we are using many years. Regards Libor Pírko

Dear Sirs, I have one question. I am looking for producer of Hot Joggling machine. Please have you this information. Thank you very much for reply. Best Regards Libor Pírko

Look on this pages www.handtmann.de They have special milling machine for long parts. We using this machine on Aerospace industry - stringers. Regards Libor Pírko

You can ask firm which using Swaging technology, may be good idea. Regards Libor

Dear Tashraf, I seeing two ekology ways. You can use high presure water or presure air with eis. We use this both technology in Czech Republic. Best Regards Libor Pírko

Dear Mr. Jensen, first bent round tube on bending machine, afterr you can use rotation swaging machine for end both. Libor Pírko

Dear Mr. Jensen, where are you from USA or Europe. This is important for starting. Pírko

Try rotation swaging machine. If you more questions send e-mail. Regards Libor Pírko

Yes I have more informations. If you are interested in send me yours e-mail regards libor Pírko

Dear friend, I would like build small wind power. I am looking for good CAD software for propeller. Thank you very much for help. Libor

We making Aerospace parts. Minimum thicknes is 0,31" from 1" thicknes. 0.018 is very small thicknes. You need very accurate clamping devices becouse you will have corrugated sheet. Which side, place you will cut. Wery wery carefull. Good Luck Libor Pírko Czech Republic

Wery carefully. You need HSC speed (rpm) and you need HSC feed and good acceleration. The complete is HSC machining. Bigger RPM you can use for small dia of tools. Good Luck Libor Pírko

power is teoretical 1Kg/cm square. Practical is about 0,8 kg/ cm square. You must calculating to inches. Libor Pírko

Look on this http://www.twi.co.uk/j32k/index.xtp Good Luck Libor

Dear Joe, try this addres http://www.finnforest.com/main.asp?path=1 You can ask abou detail. Good Luck Libor Pírko

Dear JOE, I know Witte. We use vacuum pump from Witte. VAc-Mat is very expensive. We use MDF boards for clamping sheets parts . I don´t know how you tell in USA. This is paper pressure board. This boards are semileaky. WE use MDF board for parts which is cut throug. For parts which is not cut...