We are creating an offset of 6mm or 1/4" in both the x & y. No matter what software we are using to create drawing in; .tif, .tiff, .pdf.
It seems to be a Pro/E issue versus the HP or Adobe print drivers.
Draft in Wildfire 1&2 seems to be more straight forward. But as in all softwares, calculations making drafts need to be controlled.
Using the right click to proceed thru the steps is faster than before. Although, keep in mind the dashboard options allow us to step back thru. And when you...
Do you have the drawing "showing model" by model colors before exporting.
We can set the drawing to show default or by model colors now; I wonder if that will export out differently.
We make large drawings and found Kodak Viewer limiting.
We have compupic software; here is the link for the free trial download:
http://www.photodex.com/products/compupic/
That way you can try it before you buy it.
Click view, right mouse, scroll down to projected view. Highlighted box will appear where you can place view. To create aux view, right mouse to properties and follow thru the plane choices.
Parametric Tech bought CDRS. Changed the name to ProDesigner and lost all recognition. Then they named it back to CDRS. Now that style is around they don't offer CDRS anymore. But, what they stripped out of CDRS and put in Style (2001, WF1/2) is poor at best. Loss of export cleanness...
Advance variable rounds are set up for transistions diff. It is not uncommon to have variable fail with matching ends. Add another radii in the middle and it seemed to work.
What version are you running?
No Duplicates nor No Dup/Level seemed to have no effect (yesterday). Seems today to work just fine. Must be one of the "you got to get out of ProE and back in to get it to work" things. Just getting everything out of RAM does not get rpt.qty to work.
But the field of part numbers ... still...
I have a table BOM on my assy drawing; half right & half wrong.
The Item ID#, Part Description and Balloon placement are correct.
The Part Names (part number) are the "main assy" part number repeated all the way down the table. And the Qty does not fill in anything.
Has anyone else had a...
I want to make dimension from top view into detail. The spine is a parametric dim and the section has a created dim to place it correctly in the drawing.
I always used (@D), "o" for omit so "@O &d30" to captured value of d30.
I do not get it to work in WF2.
What am I missing?
I would once again thank everyone that posted to this.
We had a damaging storm come thru. So, turn-around and driveway is natually wider. Uprooted trees (7) and blow-down (cut 18-6"+). We worked with two saws for four hours in three acres alone. Other 10 acres will just have to wait.
WF2, I like it.
I really like the Datum Sketch Feature. Used it four times today. Sweeeet!
Really seems much better than WF1. Cleaner pick paths.
And the copy/paste works.
Thanks! I will keep in mind the variables. We might have to test drive (in the driveway) before we buy.
We will know how a semi does when they come for the oaks, cherry, and walnut to mill up. We have to get around and skid drag them to crane on semi. They may also be able to give some...
Thanks again TerryScan!
We have worked hard on this 700' driveway with loop. I was hoping that we were getting it to where we could stop cutting down trees. And start putting down the initial base layers. [2thumbsup]
Thanks TerryScan! That is great news.
The 33' (or 27') inside radius would work then.
I have 18-20' wide lanes at sides of oval and a 36' high lane at top. So they would also work.
I am so glad I don't have to take down another 18 8-14" trees plus all the little stuff.