Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Uncanny3

    Subducing Head:-pneumatic motor idea

    LittleInch: The entirety of current concept is that the cylinders at pressure 1 can extend, as their outward(horizontal) faces are hidden from the pressure 1.5 . The chamber pressure has no atmosphere to bear a pressure, therefore they can again extend. The flat matings will want to be very...
  2. Uncanny3

    Subducing Head:-pneumatic motor idea

    ...in my dreams thanks for being a sounding board, if such efficient mechanisms are not discussed here, thanks for the conceptual exercise The subject can be pneumatic surface redaction theory, not hand waving perpetual motion machine if you would like to continue. I need to prepare a paper...
  3. Uncanny3

    Subducing Head:-pneumatic motor idea

    BrianPetersen: It's pneumatic, not hydraulic there is no usual exhaust, a compressed air out(which is problematic to apply in a ram actually(it will not extend again)), would be the work it theoretically does It does not gather liquid mass. it is under a constant air pressure, this concept. The...
  4. Uncanny3

    Subducing Head:-pneumatic motor idea

    3D Dave: yes agreed, the idea would be to charge a ram(inside the chamber) that transmits it's force to one outside the chamber(that spins it), and engage/disengage that outside one with switch valves, which could be done with the travel, or manually to begin with
  5. Uncanny3

    Subducing Head:-pneumatic motor idea

    3DDave: yes- 0, 1 & 1.5 are the relative pressures The squiggles are air lines zeusfaber: a piece of paper inside a compression chamber, against a fixed flat, would transmit the exposed face's pressure to the hidden one I think kjoiner: Flipping it is possible, I can charge a ram with the...
  6. Uncanny3

    Subducing Head:-pneumatic motor idea

    this does have the have the relative pressures delineated, however I'm having a hell of a time making 2 pistons move equally so forget one, and let a bind work perhaps, I am struggling to make 2 pistons work at once together the premise is that unequal areas will move equal...
  7. Uncanny3

    Subducing Head:-pneumatic motor idea

    3DDave: the principle is that if mated to a fixed flat mating, pressure is removed, allowing pressure to become immediate or not a pressure switch I hope it's fun thought anyway
  8. Uncanny3

    Subducing Head:-pneumatic motor idea

    Brian Malone: I hope it's analogous to a sand timer that moves inversely, pushing upwards, not falling. Transmission to the rotation can be pneumatically applied. This could be done by charging a ram, the engaging switches at extant point in travel. the best way to get energy/movement out of...
  9. Uncanny3

    Subducing Head:-pneumatic motor idea

    I have attached better pictures of the drawings. It has been pointed out to me that the rams do not move together, requiring a linkage. Here is best linkage==> 3DDave: a constancy of pressure goes in, useful movement goes out, no more force is applied, useful movement comes out in this...
  10. Uncanny3

    Subducing Head:-pneumatic motor idea

    Here's the 'order of operations' ==> What this is doing is possibly operating a potentially high power ram set, using gravity as the switch for now I don't mind it being called puffery, it can't succeed, I am experimenting If the faces against rigid things in pressure chambers do catch...
  11. Uncanny3

    Subducing Head:-pneumatic motor idea

    this is a proof of concept, a motion that requires no more fuel than an original air head, if the seals don't leak. This isn't a motor design, just a proof of concept pressure from the compressor is applied all the time, but there is no exhaust/relief To start a cycle the rams push open, when...
  12. Uncanny3

    Subducing Head:-pneumatic motor idea

    heya peeps, please assay this one for a concept:- the rams push outward forcing the main body up the races when it has climbed as high as the travel allows, we spin it upside down, that will release it from the rails. then the pressure in the chamber, which is higher than the rams, will push it...
  13. Uncanny3

    Subducing Head:-pneumatic motor idea

    Brian Malone, Yes it is a state of dwelling atm, as far as I can see it too. The scuffing feet are meant to be governed into a circular condition, but why would they be, their mount is planar and they feel only a linear, not circular pressure if the circular line was actually the feet's path, it...
  14. Uncanny3

    Subducing Head:-pneumatic motor idea

    perhaps the rod moves because the surface area is different, it has less pressure area a pinhead at 30psi, has less motive force than a 1" bar at 30 psi. perhaps a large ram will defeat a small one(at the same pressure), because it's exposed to more area, not because it has a different pressure...
  15. Uncanny3

    Subducing Head:-pneumatic motor idea

    thank you for your assaying, LittleInch an example that I'd like to refer to is a pneumatic ram with both ports connected to the same pressure source the air pressure is the same, but the piston head side will defeat the rod end side, because the piston head has more area The closed ram will...
  16. Uncanny3

    Subducing Head:-pneumatic motor idea

    heya, you're quite right, in one atmosphere it's copping pressure -which is supposed to cause movement. I hope it's device is amplified by a compression chamber state I think I know what you mean -like it's hard to conceive of this moving, because whatever shape doesn't move in 1 atmosphere...
  17. Uncanny3

    Subducing Head:-pneumatic motor idea

    the idea is that redacted/removed outer face, doesn't actually cause the pressure inside the vessel to change -however the theory is that one side of the foot shape has more area exposed to pressure, meaning it must be pushed forward circumferentially I have plotted the area demonstrably with...
  18. Uncanny3

    Subducing Head:-pneumatic motor idea

    BrianPetersen: The intention of the mechanism is to be a very efficient motor, if it worked it would generate electricity when coupled to a generator winding/dyno. Brian Malone: The mechanism is spinning hub, spokes and foot/scuffing blocks, within the exterior housing. The feet will not have a...
  19. Uncanny3

    Subducing Head:-pneumatic motor idea

    the sides of a pressure chamber are pushed imo, a pressure chamber is required to be very strong because of this compressed air wants to escape, it pushes at whatever wants to contain it every vessel will blow out at some point, releasing the 'press'ure every area in a pressure chamber is...
  20. Uncanny3

    Subducing Head:-pneumatic motor idea

    my gibberish on this one is just explaining a simple idea, that probably doesn't work. If a surface area is in a pressure chamber, it uncontestably is pushed, can one direction of surface fight another successfully if one has more area, further? There is no seal at the side plates other than...

Part and Inventory Search

Back
Top