Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. denlow60

    A106 Gr. B - Group 1 or Group 11 according to EN ISO 15608?

    no you not can use A106B in group1 but in group 11.1 A106A is in group 1.1 . Best regards. Dennis
  2. denlow60

    WPS / PQR with impact test

    Hello Syahar1975, This is what API 650 say about it . 9-2 API STANDARD 650 9.2.2.5 Impact tests shall show minimum values for acceptance in accordance with 4.2.8.3 and the following: a. For PI, Group 1, materials-20 J (15 ft-Ibt), average of three specimens. b...
  3. denlow60

    AWS 14.1 Help?

    AWS A-5.18/SFA-5.18M give you more detail
  4. denlow60

    3mm weld overlay in API6A requirement

    Chemical analysis shall be performed on the weld metal in accordance with the requirements of ASME, BPVC:2004, Section IX, at a location 3 mm (0,125 in) or less from the original base-metal surface. The chemical composition of the deposited weld metal at that location shall be as specified by...
  5. denlow60

    3mm weld overlay in API6A requirement

    API 6A 6.5.1.2.1 General This subclause applies to use of corrosion-resistant weld overlay for bodies, bonnets, hub end connectors, and end and outlet connectors for purposes other than ring grooves. These requirements do not apply to hard facing or to the weld overlay of valve-bore sealing...
  6. denlow60

    Is 24 hour cool down necessary for non exotic welding before MPI

    DekDee, look in this pdf. Regards,http://files.engineering.com/getfile.aspx?folder=daef1699-bcc5-45cf-9e97-954a6a62d9de&file=iso-1090-2-2008.pdf
  7. denlow60

    Is 24 hour cool down necessary for non exotic welding before MPI

    DekDee, can you show me where it is written that it is no Regards, Denlow
  8. denlow60

    Is 24 hour cool down necessary for non exotic welding before MPI

    yes they can 72 hours or 24 hours
  9. denlow60

    API-1104 Welder Qualification

    f) A change in position from that for which the welder has already qualified (e.g. a change from rolled to fixed or a change from vertical to horizontal or vice versa). A welder who qualifies in the fixed position shall also be qualified to perform rolled welds within the essential variables...
  10. denlow60

    EN 12952-2 Flanges and fittigs materials

    xgiorg's, these materials do occur in EN 12952-2:2011
  11. denlow60

    1.4409

    look in EN 10213 for complete information http://files.engineering.com/getfile.aspx?folder=e03e8388-cadc-473b-8027-082bc2691757&file=1.4409.pdf
  12. denlow60

    SA335 Gr.P22 - Welding Electrode & Filler Wire

    @Quality2479, my apologize it's E8018 - B3L.
  13. denlow60

    SA335 Gr.P22 - Welding Electrode & Filler Wire

    Weldstand, no I 'm not going to weld wit electrode E8018 - B1 - H4. because the question is where are you going weld with I choose for E9018 - B3. but you can also use E8018 -B3 and other electrode.
  14. denlow60

    SA335 Gr.P22 - Welding Electrode & Filler Wire

    next attempt.http://files.engineering.com/getfile.aspx?folder=bb1cf888-c2c2-488b-9306-4b0e04597ddc&file=Make_your_decision.docx
  15. denlow60

    SA335 Gr.P22 - Welding Electrode & Filler Wire

    Make your decision. Composition, % Phosphorus, Sulfur, Carbon Manganese Max. Max...
  16. denlow60

    Is the WPS worthy?

    Larry329, this is watt Section 9 said about metal. QW-403.1 A change from a base metal listed under one P‐Number in Table QW/QB-422 to a metal listed under another P‐Number or to any other base metal. When joints are made between two base metals that have different P‐Numbers, a procedure...
  17. denlow60

    BH-36K Material

    look here http://www.aria.developpement-durable.gouv.fr/wp-content/files_mf/FD_1_feyzin_1966_ang.pdf
  18. denlow60

    SA516 Gr.70 - classification as per ISO / TR 15608-2013

    This material SA/A516 Gr.70 is in ISO/TR 15608:2005[1] group 11.1
  19. denlow60

    What is the Material Group of X10CrWMoVNb9-2 as per ISO 15608?

    P92 does not appear in the ISO / EN standard UNS Phosphorus, Sulfur, Grade DesignationA Carbon Manganese Max. Max. Silicon Chromium Molybdenum Others P92 K92460 0.07–0.13 0.30–0.60...
  20. denlow60

    What is the Material Group of X10CrWMoVNb9-2 as per ISO 15608?

    ISO/TR 20172:2009(E): X10CrMoVNb9-1 Group 6.4 Standard(s)EN 10216-2, EN 10222-2 ISO/TR 20173:2009(E): ASTM/ASME Type or grade UNS No. ASME/AWS P or M No. Group No. ISO/TR 15608:2005[1] group Nominal composition A/SA 234 WP91...

Part and Inventory Search

Back
Top