In RSlogix5000, under the communications tab, who active, I see the IP address of the PLC showing (Im guessing) default of 169.254.0.1, but as an unknown device. I've set the the address of the PC to static, giving it an address of 169.254.0.2, mask of 255.255.255.0, and gateway of 169.254.0.5...
I'm using for the first time POINTio consisting of an ethernet module 1734-AENT and a 1734-OA2 and two 1734-IN4.
Within RLSlogix5000, I've added the 1734-AENT under the IO config and ethernet. But I do not seem to either find where the actual IO modules are added, or even addressed. (BTW this...
According to the programming guide, output words 4 and 5 have the analog values. So how do you put values in there? I know..its a simple question but...I cant create a data file for O4 and O5, so how do you control the two analog outputs?
Have a customer that wants to run our equipment using a CHARMS IO system from Emerson. Anyone have experience with this? The signals are pretty basic, couple of limit switches, a door interlock and motor starters. I'm thinking this can be run direct to it but I dont have any specs on the IO...
OK...final piece to the puzzle. Right now I have the ML1400 talking to my Panelview using a 1761-net-AIC module. I'm using the DIN connector input from the PLC DB9, and the terminal block connecting to the PV1000 RJ45. All is good there..its working great.
I have two PowerFlex VFDs that I...
OK..now that I can download the program to the Panelview (had to use a AB CF card for that)
Hardware is the ML1400, the Panelview1000 2711-T10C3, and a 1767-AIC unit.
The ML has CH0 for the programming port, CH1 is ethernet and the DB9 is CH2. I connected from the DB9 to either the DB9 or the...
2711-T10C3 DH485 rs232
First of all..I want to thank those who take the time to read the posts, assuming your as busy as I am and can hardly keep up with things as it is.
I have a Panelview1000 2711-T10C3 so it has DH485 and a RS232 port. The last time I did a panelview was years ago, but as...
I haven't done an AB Micrologix project for maybe 5 or 6 years now, and in fact my copy of RSLOGIX500 doesnt even support the 1400...updated software on order.
But after doing some looking around, reading AB manuals....fun eh?
What I have for this project is the Micrologix1400 connected to a...
