Hi Guys,
I'm assuming this is a bit of an ambitious question but here goes. I'm an Applied Physics (B.Sc) graduate, and have been working for an Aviation MRO in Ireland for the past year since graduating from university. Aerospace is my industry of choice at the moment, but my real goal is to...
Hi all,
We have a unit in on which the RVDT is broken and Woodward MPC no longer manufacture the unit. Its a 26 VRMS 400 Hz single channel sensor that measures the angular position of the shaft on a throttle valve, that rotates through a range of 90 degrees. I've gone to nearly every OEM I can...
Hello,
Can anyone suggest a suitable fluid to use when testing a unit that runs on Shell JP-5 (Mil-T-5624J)? We normally test units on our rig with Aeroshell Calibration Fluid 2. I've contacted Shell themselves to see if there is a similar calibration fluid equivalent to JP-5 but there are less...
Hi,
Just a quick question, if I change(on a test rig for valves etc) from using one oil to another oil that has a different specific gravity, and I need to supply a particular flow rate, do I need to account for the change in specific gravity in my flow rate, assuming pressure drop stays the...
Does anyone know what actually happened to Midland Ross Co and if so, is there ANYWHERE someone could suggest to go to procure and IPC for a Shut-Off Valve manual? The internet search is proving particularly fruitless..
Thanks
Hi.
We have an axial piston variable starter motor in that we normally get sent out for test but are looking into testing ourselves on our own rig. The manual calls for a calibration fluid of a particular operating viscosity (16-36mm2/s) when carrying out the test. The problem is, our rig uses...
Hi Guys,
First post here so if I've left out any information let me know.
We received a manual for repairing an aspirator hose assembly that requires the use of McLube 1720L. I was wondering does anyone know a suitable alternative for this material? There seems to be very little on the net about...
Hi Guys,
First post here. Just wondering, I have a manual for repairing an aspirator hose assembly that requires the use of McLube 1720L. I was wondering does anyone know a suitable alternative for this material? There seems to be very little on the net about this particular P/N as opposed to...
