Hi all,
I am using ABAQUS explicit to model a sandwich core material that consists of a lot of fibres aligned at small angles to the metallic faceplates. I used the continuum element to model this core. Because this material is plastic pressure dependent, I cannot use VonMises and J2 flow law...
Hi there
Sometimes I need to turn off the computer when abaqus is computing. But I want to keep these results so that I could continue the previous computation after restar. Does anybody know how to do this?
Thanks.
Daowu
I am doing an experiment by using a steel ball (14 mm Diameter) to impact onto the center of a simply supported circular panel with a thickness of 1.2 mm at a velocity of 2~3 m/s. I am concerned with the impact force and strain in the panel. I have finished the numerical and analytical model but...
Hi, I am trying to model two cuvred circular beam contact each other in plane. I find there are two possible choices in this problem. The first method is to use the common surface based contact method, i.e., define the beam element as beam surface and then let them contact each other. The...
I want to test the sound transmission loss of one new sandwich sheet material. I checked the ISO standard test (ISO 10534-2, ASTM C384-88, ASTM E1050-98)and almost all of them require special microphones (such as impedence tube or two microphone methods), which are quite expensive (perhaps 6000...
What is the relationship between Absorption coefficient and Sound transmission loss? I read a paper which says that the absorption ability confict with the sound transmission loss for the same material. Is it right? Why?
Hi,
I have a lot of questions but the following two questions are more urgent to me now.
I want to measure the acoustic properties of an ultralight sandwich material(totally only 1.2mm thick). My current plan is to use the impedance tube and two microphones method(ASTM E1050) to measure the...
Hi,
Recently, I am begining to work for a project about sound transmission loss through a sandwich panel. Many literatures says coincidency freq. is that the trace wavelength matches the free bending wave in the panel. I feel confused. What is the trace wave? What's the relation with incident...
