Hello there,
Regarding my question -creating a thermoformed tray for few products- i searched the forum and found some one had a suggestion as follows, I was wondering if this is refereed to the same approach as creating a dummy block for the products and then using the indenting tool or some...
Hello all,
Following my previous threads, I created a dummy(like a male die) to make a tray( with a certain thickness)using 'indent' function. Trying indent function as an ex some where else it does work, but in this specific geometry it doesnt, ..I assume it's because of sophistication of the...
I still didnt get the chance to try the hints I got in my previous thread, ..but, there is a new question if you have time:
I need to create a cylindrical shape, let's say a pipe, which is tapered in some specific segments and differently as there are few decremental barbs along the pipe. I...
I have a 2D sketch plane containing bunch of closed contours each has to be boss extruded separately because of different depths. If I select a closed contour at the beginning and boss-extrude it, i will lose the rest of the 2D drawing. And if I extrude a plane on which the contours are located...
Reviewing the SW help and online stuff, unfortunately I couldnt find any practical tutorials about how to do/perform the 'indent function' as some fellows suggested for my project.
My project is about making a PVC tray with a certain thickness having different compartments, depths, and shapes...
I have been trying to import a file from AutoCAD to SW, the only way this is done is the "drawing" format in SW and not the "part" file or format. This, I can work on 2D as drawing in SW but cannot exit to the 3D environment which is my ultimate goal, making a 3D drawing(or part) in SW from a 2D...
Here is my final model, I need to run the flow inside. The inlet port is the tube/pipe tangent to the surface on the top (dome or semi-sphere)part and the outlet port is the pipe on the bottom, (the other small pipe normal on the top is the air-vent) we dont need it here.
SW keeps giving the...
I am trying to use cut\with surface to chop off a part of my object. You need to select a surface/plane where you wanna cut your part according to this surface/plane. I am not able to select this or these surfaces. I click on them but they dont get selected and nothing proceeds. ???
OR if you...
The object(a chamber with a filter inside) is ready for the flow simulation, you should close the inlet and outlet as SW prompts you by putting "lids" to get the simulation run, I did so but it keeps giving the error saying: "The selected face dose not contact fluid or it is an external face of...
The object(a chamber with a filter inside) is ready for the flow simulation, you should close the inlet and outlet as SW prompts you by putting "lids", I did so but it keeps giving the error saying: "The selected face dose not contact fluid or it is an external face of the model"
I changed the...
