Dear All,
How could I use the Measured Data and the Inspection Analyze commands in the Inspection environment in NX8.5?
Thanks all.
Attila Szepesi
support engineer
graphIT Ltd.
www.graphit.hu
Where could I find the Tolerance Stackup Validation toolbar?
I remembered that It was a environment in NX6.
The help says: Analysis→Tolerance Stackup Validation, but there is not there.
Dear All,
I added the following rows to the end of the holder_ascii.def file:
CLASS GRAPHIT_MILLING
{
TYPE QRY
QUERY "[DB(Type)] == [03]"
DIALOG libref Type
RSET libref Description N_Sections Max_offset
UI_NAME "Graphit_Milling"
CLASS MILL_1...
Dear All,
I created a custom view in Modeling environment. I created a drawing view from this custom view in the Drafting environment. I switched to Modeling and changed the custom view's orientation and I used the MB3 to save it. When I switch back into the drafting environment I find that the...
Dear All,
Has anybody got a little tool, macro, journal to put the automation TL, BL, WL line into the Modeling space and/or Drafting area?
Attila Szepesi
support engineer
graphIT Ltd.
www.graphit.hu
Dear All,
I created a parts list template with some custom columns and red font for the text and some other custom styles.
When I drag and drop this template from the table_files palette from the resources bar then the created parts list doesn't inherit my custom styles. It uses something...
Dear All,
I find the following document:
Simulation Connection
June, 2009
Introduction to NX Open for CAE Processes
I found it on the web but I couldn't download it.
It contains some scripts, too.
I would like to write an exe file to generate JT file from Nastran op2 file.
I wrote a...
I would like to share with you a funny picture from the ugii.txt file.
I create the Hungarian localization for NX8.0 and I found the attached picture. Try to merge the selected rows to one sentence.
John,
what would be this?
The quick lazy dog jumps the fox.
is it possible?
Let see the following sample:
The designer has this assembly structure:
Assy
Component1
Component2 (this component has a WAVE link from the component2)
Bolt M10x30
Nut M10
The designer would like to generate a different design phase appending a „_v2” string to the all of the...
John,
What is your opinion from the following situation?
NX8.0 in English (metric)
Create a part file with a small cylinder (dia.20x50)
Put a symbolic thread to the cylindrical surface
Create an other part file with a small block (100x100x100)
Create an assembly part file and assemble the...
Hi all,
Does anybody know that how I could model a double coil spring?
In the lamp factory it is called cc (coil coil). There is in a standard wolfram coil lamp.
And what about the ccc coil?
Somebody,
I think it is a newbie question but I don't know the answer.
The situation:
There is an assembly with three predefined different points.
Place a component to one of three points with some assembly constraints.
could I create a component array definiton to these points from this component?
John or somebody,
I attached a picture where you see that the assembly contains two components and three constraints between the components.
You can see the all components are fully constraint but this is false.
When you suppress and unsuppress one of three constraints you see that every...
John or somebody,
Our customer uses NX7.3.3.5 and he gets the following message:
>>>> Error code 580128 caught in file "O:\ugnx753\ip3\src\syss\dman\ind\OM_ReferenceTable.cxx" at line number 611
>>>> Error code 580128 caught in file "O:\ugnx753\ip3\src\syss\dman\ind\OM_ReferenceTable.cxx" at...
Dear All,
I have a workflow with two tasks: do task and status task.
I add a TSTK-CreateTranslationRequest action handler to the Complete step of the do task.
I create a pdf dataset from a MSWordX dataset with this translation.
I would like to pause the workflow until generating the PDF dataset...
