Hey guys, im looking to get a new radiator for my project car, a vq35HR (350z engine) powered 240sx.
the 350z radiator wont fit, and even if it would, i might need some additional cooling later on if i decide to turbo it.
I want to buy a custom radiator, but i have no idea what to get. 1 core...
I am wondering what the maximum limitations are on reed vaves...
is there a reed valve design that can open and close 5000x per second, or is that absurdly beyone what is possible? could such a valve withstand heat variations in the 500F to 1200F range?
it wouldnt need to prevent 100% of...
i need a rough idea of what the air pressure would be behind a turbo making about 7psi of boost.
turbo would be t25-ish in size and would be serving about 1.7 liters of engine
i only need a very rough idea... if you say, for example, its 10-15psi above atmospheric than that's close enough for...
I have a 240sx project car that I am swapping a v6 into, and i was forced to relocate the steering rack because of clearance issues. I had to lower it 2 inches because the pinion housing was in the way of the starter motor.
Anyways, I figured that I could just add a 2 inch drop to the outside...
Basically, im am wondering if there is a lightweight air type pump that is suitable for this application.
I have an air source at like 300cfm at like 7-10 psi above atmospheric, and i want to be able to generate up to about 100cfm of air at somewhere around 20 psi above atmospheric.
It would...
Ok, basically anti-lag systems are impractical because they are loud, and they destroy turbochargers.
I know that the "pulses" of the explosions shock the turbochargers, and that is what causes the damage.
The way to make it a more reliable system, then, would be to change a few large pulses...
Does anyone know of a freeware program that could be used to model a suspension system? I am interested in finding out the effects of changing the inward inclination of the struts, as well as changing the caster angle. I know the 'direction' of the effects, and I can come fairly close in 2d, but...
