NX11 Arrangement, example is a wing stowed and deployed. Someone has already created the Arrangement, but further design additions now have additional components that need to be shown in the existing Arrangement. Can these components be added to the existing Arrangement?
Thanks in advance for...
I am running NX10 and I have the usual Assembly Constraints used to locate components in an assembly that I can see and select in the Assembly Navigator. When I do a Menu > Information > Other > Layer the Information window shows me the ones I mentioned above plus an additional 52 Assembly...
We are running NX12 on workstations and it has been a while since I have done weights of my parts. I have already assigned material to each component at the component level.
At the assembly level how do I go about asking what the weight is of some group of the components?
Thank you,
Gary A.
I have several Parasolids that I have assigned material to and need some guidance on how to get the overall weight. Can someone please point me in the right direction?
Creating a section line in NX/UG12 using locations only seen if hidden lines are shown. The section lines themselves turn the unassociated color if I turn the hidden lines to invisible to keep view not so busy because of all the hidden lines for the finished drawing.
Is there some setting I...
I have created an Exploded View in the Drafting Application on the Model side. Now I cannot figure out how to add it to the face of the drawing. Can someone please point me in the right direction?
When I go to Menu / Insert / View / Base..., I cannot locate where this new Exploded View is so...
We are running NX12 with Teamcenter and I need to know how to open an earlier version of a saved Dataset. I knew how to do it in NX7, but now that procedure does not seem to work.
Please help me out.
Thank you.
We recently upgraded from NX7.5 to NX11 and I have a question about lines/curves/text that I added on the Modeling side of the Drafting Application (Display Sheet off.) not showing up in the view(s) I insert onto the face of the drawing. I already know about the Layers Visible In View, having...
Our company recently did an upgrade from NX 7.5 to 11.0 and at the same time PLM Teamcenter 9 to 11. I am attempting to do a simple Save As to a new revision and am unable to get a grasp on how to do this once simple task.
Here is the Assembly Navigation setup we have as an example...
Up until recently I have been able to rotate the 3D image (Using a 3DConnection Spaceball) and the image stayed detailed. We are running UG/NX7.5.5.4 on Dell workstations and this new faceted effect is not what I am used to.
Even after the image resets after the rotation ceases the image is...
We are running NX7.5 with GD&T version ASME Y15.5-1994 used on our drawings.
Up until fairly recently placing the datums on a drawing detail has been fairly easy to do. We prefer the datum feature frame in the horizontal orientation, but have encountered a problem recently.
On the two...
I have asked this question before, but the thread was canceled and no answers are available, so I am asking again.
We are using UG/NX7.5 and one of our designers inadvertantly selected Manifestation instead of Specification during a save. The user continued on unknowingly and completed the...
One of our users is creating line geometry in model space and their UG/NX 7.5 Dell workstation does not have a spaceball type device. Is there a way to lock rotation so it is easier for them to work on one plane?
Thank you for your help.
I did a quick search and came up empty handed on this forum concerning the question in the title. I am sure there must be a somewhat simple way of achieving the constraint I am looking for, but thus far I have not figured it out yet. If the wealth of combined knowledge available thru this forum...
Did the search and I think I know the answer, but thought I would ask anyway.
We run TCE alongside UG/NX7 and are considering having an outside source do some design and drawings for us in Solidworks. In the end we would want to take those assembly and componet models along with their drawings...
We are curently using NX7.5 with TCE and one of our designers has the model file already saved to revision "-".
The only process I can find is from an older version of UG (NX4) and it seems as though the process has changed.
Can someone please advise us on what to do?
Thank you.
A co-worker has a UG/NX7.5 solid body feature that has a red circle with a red slash thru it in the Part Navigator, what does that mean?
Thank you in advance for your help.
Our son is taking SolidWorks 3D design and drafting classes in college and we would like to purchase software and hardware so he could practice and possibly work at home. We need suggestions for a computer/workstation to run it on and best version/modules of the software to load on it.
Our...
UG/NX 7.5 on Windows XP Dell Workstation.
I have saved all the models, model assembly, and specification drawing files correctly and then closed them all.
The files have not been statused in Team Center and the same files are not Checked Out by me.
When another user opens the files UG/NX...
NX7.5 on Dell Windows XP 64 bit workstation.
What does it mean when I open a previously opened and saved assembly and the top bar part number information ends with "(Modified)"?
I.E.: NX 7.5 - Drafting - [AGE17492_99167/--DRIVER (specification: DWG_AGE17472_99167/-) (Modified)]
I have already...
