Search results for query: *

I have Catia V6 Essentials and my support vendor lost their only admin. I have a critical issue and I need the latest HF installed. I tried, but I do not even know what files I really need to download and how they install. I can update the client side easily, but not the server. Does anyone have...

Catia keeps locking up and thinking about something for about a minute quite often. Then it comes back to life and works fine. Has anyone experienced this? Is it trying to page something then timing out?

I can not save my results when I run an analysis. I found the following which describes my issue: http://www-01.ibm.com/support/docview.wss?uid=swg1HD82148 But, I was wondering if there was a work around?

Anyone have a good source to get Abaqus training? I would like to learn the software to be able to compair it against the Built in Catia solver to see if it is worth the investment for our company.

I have a pin that goes through two bushings on the sides of another bushing. The problem is the pin shoots out of the bushings. I am able to apply a contact restraint with a clearance on the inner faces of the bushing to the pin. But, If I try to restrain it the outer face of pin to outer...

I enter the standard "cnext -env CATIA.V5R19.B19 -admin" in run and it errors out "Requested Administrator Mode Failed Variable CATReferenceSettingPath in your enviroment (CATIA_P3.V5R19.B19) is not set Set the CATReferenceSettingPath Variable in your enviroment" See attached for more info.

We have a new employee who has used Solid Works for quite a few years. Is there a way to change the mouse properties in Catia to function like Solid Works?

I am trying to model a frame that is supported by an air ride suspension. I tried using only the spring rate ~800. But, the model moves all the stresses through the front mount and bushing (20,000 spring rate). In reality the air spring takes 80% of the weight in the model it is taking >10%...

How do you apply a point load on a solid using the built in FEA solver?

In properties in V17 I could add formulas using the right click on Other properties when they were defined as a length. Now in V19 that option is gone. Anyone have a work around?

When I try and do a Send To even after I did a new from and did not bring the files along I get a bunch of "Not found" items. How can I edit the product to remove the files? I have already ran DMU Utility.

Is there anyway to dxf out all parts in an assembly at once? Our file has around 200 sheet metal parts.

Parts disappeared from assembly but, are located on disk still and can be opened/read. I can not point these icons to the files. See attached photo.

Somehow the global axis of an upper product got rotated. I have other products tied in associativity and now Horizontal and Vertical is no longer the same as in the Upper Geometry. My question is how can I change either the global axis of the upper assembly or change each of the parts to match...

I created a base design with all the Drawings for this base design. When I do a new from and select the Base design how do I bring along all the Drawings?

I created a layout in 2D layout for 3D design but, none of the dimensions are staying generative and when I update the 3D part the dimensions just stay where they were with the same measurement. I then go back and redimension the whole drawing. Could someone please explain if there is a way to...

We are setting up rollers that will ride on the inside of a channel like the uprights on a forklift. I can not find the approx 6" Channel with 1/2" walls needed all the channels I have come into contact with have greater than 90° on the inner walls. Could anyone lead me in the right direction...

A few old parts we continue to make from A514 which is quite expensive (.7-1.1 per pound). I recently took a call from SSAB (swedish steel) who just recently purchased IPSCO. They explained to me that Domex was a better alternative to A514 and they could get it to me for around .4 per pound cut...

My problem is the one beam has to flip on top using some sort of air or air/hydraulic a full 180° and then come back extended. -The point of rotation is above the two beams -when flipped the cylinder can not extend past the end of the assembly. The point of flipping is to save length for...

I have a template product that I adjust depending on different requirements, many parts are made using this template. I can not save any of these similar parts because it tends to over right parts in the template OR keep associativity with them. My question is there a method that can get me...