Hi all,
I have a drawing that needs to show an exploded view from an assembly further up the tree. I know that I can take a part view from other assys but it seems I cannot take a part view from the other assemblies spec file, which is where I have to create the exploded view (using the master...
Hi All,
We have an existing NX large assembly of a piece of equipment (say assy1), I need to create another piece of equipment (Say Assy2) that is 90% the same as Assy1. Assy2 needs to be a specific part number which already exists on Teamcenter.
I am trying to find a way to save all of the...
Hi All,
I have a sketch in NX7.5 which keeps over constraining too quickly when I add contraints. I have tested this by adding a completly seperate line with no inferred contraints, the sketch tells me I need 3 contraints. When I try this with another sketch that is working normally the sketch...
Hi all,
Since we updated from NX4 to NX7.5 drawings in our system have had some of the angles flipped, ie a 20deg angle will now be 160deg. I see this mostly on hole centerlines dimentioned fron section lines.
Any one else had this issue? is there a fix?
Cheers,
Rich
Hi all,
I am not sure if this is a problem with NX in general or just our system.
NX7.5
I have noticed when up revising drawings that the 'Break line/ Detail' view boundries have changed to 'Manual Rectangle' not only this but when I try to recreate the 'Break line / Detail' boundry I am...
Hi all,
I want to 'save as' an NX assembly drawing say 'DWG10' to an existing part no 'DWG5'. Teamcenter won’t let me do this the normal way because it is an existing part. I need this specific number because it is referenced elsewhere. I want to keep all mating conditions and drawing...
Hi All,
I am trying to model strapping/rigging within an assy. the assy consists of an item which is strapped to a frame using straps with friction buckles attached.
I want the straps to be associative to the position of the item and of the position of the buckles. My method has been to create...
Hi All,
Bit of a weird one here.
For some reason NX will not let me set a component of an assy to reference only (Right Click, properties, tick ref only) so it doesnt appear in the BOM/PSE, the tick always unticks its self! Previous identical items added allow this but not any I try to add...
Hi All,
Sorry if this has been metioned before but I cant find an answer after searching.
What is the best approach for drafting different configurations of an assembly when I need to show views with parts in differnt positions and also different quantities?
The top assy consists of:
1-off...
Hi all,
I have a table I am creating in drafting. After creating 32 rows when I choose insert row below it wont let me. I get a row starting from the top of the table to the side of the top row.
Is this normal? How can I create a row below?
NX7.5
Cheers,
Rich
Hi all,
I am modeling up a concept for a submerged 'aerofoil' type shape. This will be made of GRP and house some metalic components.
We want to try to insure the centre of buoyancy is in the same position as the centre of mass/gravity. To do this we can play around with the size/position of...
Hi all,
Please let me know if this can be done because every time I try this I just get a sheet body rather than solid. Here is the description (Unfortunatly I cant upload due to IPR)
Say I have a solid wing shape, all I want to do is offset a square section of the wing surface along a vector...
Hi all,
The drawing calls up hardmarking the part number with ministress stamps. However we are finding the hardmark gets covered up when painting.
Anyone know how we can stop this happening? Only thing I can think of is using larger ministress stamps which punch deeper. Or using a marker pen...
Hi all,
Not sure this is the best place but can not find a dedicated Teamcenter forum.
Does any one know a quick and easy way to change an assemblies BOM view/PSE to call up a previous rev of a component? This is what happened - I up revise an (NX) assembly and within the Teamcenter BOM view I...
Hi all,
I am on NX 7.5.
I have an assembly part, for simplicity lets say there are 2 components. A shaft with a flat, going through a block with a hole. There is an assembly operation needed in which a hole needs to be drilled through the block and shaft on assy. Therefore I created a wave...
Would apprieciate some help here :-)
I am working on a drawing of a hollow cylinder, the outer diameter tolerance states;
189
188
- Larger number on top as I would expect.
But the inner diameter tolerance states;
159
160
- Smaller diameter on top, which is not what I would expect.
I have been...
Morning all,
I'm creating a sheet metal part and have a problem. The part is made up of 90° flanges that fold on top of each other (not intersecting tho).
As the flanges touch each other they become united, ( both edge faces of the flanges highlight at the same time), I think this is causing...
This question has come up a few times but not been answered adequately for me, ref - thread561-154664.
Is there a way to do this quickly? As changing the origin relative to view for each note is very cumbersome.
I have tried grouping the text but still cant associate all the text to the...
