Search results for query: *

Hi Edgers, I have heard that ST5 launch 17 July. How can I see that I have the license for ST5? There is no info in SElicense,dat about ST5. I have logged into gtac support site via my webke. There I can see I just have ST4 and ST4 borrowing, and previous versions. Solid Edge ST4 Premium...

I need to convert a sketch from an elipse into several connected end- and start points with different radius. The reason I have to this is that this sketch are the reference geometry for a CNC operation. I have to put on dimensions for programming. That means start and end points, also the...

Hi,how do I make a Block? I´m trying to make blocks so revision notes ("Issued for construction" etc.)can easily be inserted. And where shall I save the blocks? ST4 on a Macbook pro with 8Gb RAM Yes, it works fine :-)

Is there a way to change the default partlist. Solid Edge V19 SP 7

Hello, I'm trying to import a stl file into SE part. Can I solidify the surfaces?

When I start a new document with the aid of New dialog box there are some tabs I don’t understand. 1. Reports tab; is empty, how do I make a template? 2. Tutorial tab: When shall I use these templates? Best regards Ramviking SE V19 SP7

How can I show PMI in draft environment?

Hi, I have a problem. I'm designing technical drawings for the offhore industry. I need a lot of predefined symbols and text. I'm not familiar with creating macro etc. How can i make these (without programming)and how can I select(after I have made)them in the most easily way. Best regards :)

How do I use the crown feature. I'm doing something wrong, it allway fail.

I arrange the drawings (assy) in this way: 1. General arrangement 2. Main assembly (with part list) 3. Steel drawing (this is the drawing without bolts, washer, etc.) 4. Detail drawings (typical; sheet metal parts and parts) How do I create sheet 3 (steel drawing) and sheet 4 (detail...

Is there a callout command for total weight in an assy?

Is it possible to make a default colour (background sheet) similar to inventor in draft modus? Now the background colour is the same both inside and outside the drawing border.

I’ve made an assy of a skid, I’ve used the frame function. The part list is working excellent. The problem is that I need individual drawings of each component the frame function has generated. The way I do this today is to save each component and then I have to generate the drawing from that...

In the main assy (sheet one) I have ten parts. I have ten sheets containing the the individual parts. In the assy sheet I have the partlist and balloons ( item1 = Part1, item2 = part2 and so on). All the sheets must have part list, but the pos. is allways "1", because it only contains one...

I have made a part in X-Z plane, I need to re-orientate the part into XY-plane. How can I do that?

I've inserted a picture in a sketch and trying to wrap this sketch incl. the picture round the surface. The sketch is wrapping ok, but not the picture. I'm in working in part environment.

I need to make some cutouts in a part within an assy, but the sketch don't snap to underlying parts. What am I doing wrong?

Is it possible to convert a sheet metal part made in SE into SW format? That's because my customer use SW and need to modify some values.

Is there an easy way to make a revision cloud in draft?