Im looking for an ASTM Cleanliness Spec...I think its ASTM 303 but all I can find is ASTM F303 which i believe is for fluid cleanliness. Does anyone have experience with the ASTM cleanliness spec? Any help would be greatly appreciated.
Hello all,
I looking for a platable plastic thats capable of 125c. Unfortunately, PC/ABS blends are boarderline. Can any one recommend a high-temp platable plastic that is easily capable of 125c.
I'm starting a sheet metal drawing with the flat layout. The bend notes show up, but not the bendlines. I thought these coincide together. Does anyone know if and where the setting is to show bendlines. Thanks
Is it possible to create an isometric section view in the model to be used in the drawing. I have saved a section view several times to be used in the drawing but i doesn't come in sectioned. Any help would be appreciated.
I am currently preparing to do a machining drawing from a cast housing and trying to establish the datums. I have taken a class on GD&T some time ago and know enough to be dangerous, but do not use is that often, unfortunately so does my boss. I would like to set up the primary, secondary, and...
Im modeling up an assembly where a capacitor is epoxied in a housing using 2007. Is there a simple way to create the "epoxy" in the void between the housing and the capacitor as a model. I would like to show this for visual appeal. Thanks for your feedback.
I have a cast part with all machining features within the model, named XXXX-Cast. In the past, I have saved this type of model as XXXX-Machined and did not check save as copy. I then did something to have the machined model reference the casting model so when i made a change in the cast model...
When designing a rubber part do you use the same guidelines/general practices as plastic parts or is there a huge differance between them? I know designs in rubber may be more feasible than plastic due to the fact that rubber is flexible.
So Im trying to place a mate in a rotary clutch system. I'm having problems mating the ball bearings so they will ride in the raceway that was put in with a helix. When I have the ball bearing origin selected it will not let me pick the helix to apply a coincident mate. Any suggestions? See...
I'm looking for the reference spec for inch series internal snap rings for a one inch bore. Mcmaster #98409A211. In the Machinery's Handbook it list MS 16624 for the external series but list nothing for the internal. Is it the same spec? I would like to reference the spec on my drawing. If...
