I got this piece of digitizer that is connected to the PC via USB. I would like to be able to change settings and stream data from this digitizer when need. I have the user manual which defines the registers of this digitizer and I also have the custom driver installed. SO there is no need to...
Copied from wiki about RS-232, "the standard requires the transmitter to use +12V and ?12V, but requires the receiver to distinguish voltages as low as +3V and -3V. Some manufacturers therefore built transmitters that supplied +5V and -5V and labeled them as "RS-232 compatible."
At what voltage...
Noob question.
Referring to the circuit attached, what is the purpose of having R276 between the gate and source of the transistor?
This is a typical voltage transfer circuit from microprocessor signal "TXDSNMP" (3.3V/0V) to "SNMPTXD" (+12V/-12V) signal. Thanks in advance.
I am trying to simulate the growth of thin oxide (between 2-5nm) with FLOOPS. So I type the following code/command (which is basic oxidation)
diffuse temp=1000<C> time=10.0<s> O2
How can I tell the software while model I want it to simulate? Obviously Deal-Grove model will be wrong in this...
I am new to this simulation software. Any help will be appreciated.
It keep giving me the following msg when I try to run floops. Anyone know why?
DATEX: No materials and variales found.
The material name "Default" was not found in DATEX !
For Titanium silicide, why does it require 2-step anneal instead of 1? I know the 1st anneal is at ~600 degree C to form the silicide and the 2nd at ~800 degree C to further lower the resistivity. But why can't it be done in just the 2nd step? I was told it has something to do with the weird...
