Search results for query: *

Hi, I have made a part on the top plane, but now i see that the front plane would be better. I know that there must be a way to change a part from an plane to an other, but how? thanks Toolmaker

Hi, SW version 2007 in (extrude 1)I have a sketch in witch I want to relocate/move the origin from the left corner to the middle of the sketch. I first tried the following: Click Edit sketch/in the sketch I click on the origin, and (in the existing relation box) I selected the coincident o...

Hi, I want to make an angled cutout in an assembly.(two parts) I have two cylindrical tubes concentric in an assembly that I want to cutout in an angle. Is there a way to make the cutout as you would do normally if these parts were one piece? Because of the angle it is hard to do it in the...

Hi , I have made a section view of a part, and I want to color the face of the section to show the section-cut more clearly. How to do this? Toolmaker

I need to make a threaded hole through the length of a cylinder Cylinder diameter 50mm Cylinder length 40mm Threaded hole 1.250-18 (through all) Am I correct that 1.250 is the diameter , and that 18 is the pitch ? I have never worked with inch before, so how do I select this 1.250-18 thread ...

Hi, I have opened a part from witch i want to make a drawing,when i go to file i click the make drawing from part button,i can drag the part view from the right side of my screen into the drawing sheet. the problem starts when i want to dimensioning the part, for some reason i can not...

Hi, i am having a error in my attempt to create a fillet In the attachment a picture of my part. The textbox explains on witch location I need my fillet of 30mm Toolmaker

Hi, I started learning solidworks (2007) recently,but having trouble selecting a plane to sketch a cutout on the outside of a cilinder, i think that i need to offset from surface? and than give depth dimensions,(offset from)? A picture to explane thanks, altnickee

Hi, I started learning solidworks (2007) recently,but having trouble selecting a plane to sketch a cutout on the outside of a cilinder, i think that i need to offset from surface? and than give depth dimensions,(offset from)? A picture to explane thanks, altnickee

Hi, When i import/open a *igs file in solid edge (V19) Solid edge convert it so i can see/read it, but i can only see the part, not the "solids" of how its build up, as i normally do in solid edge. Second: the default view is always upside down or in a odd angle. Is there a way to solve...

Hello, I need to mill a female dovetail in a tool, in witch a extra part of the tool needs to be fixed (press fit) I know there is a way to measure with a two small wire rod. In the Machinery Handbook i found a explanation,but i don't understand some of it see link for picture In the...

Hi, I want to make a helical cutout inside a tube (a spiral spline) After making the tube i click the helical cutout button and start drawing the cutout on the plane at the end face of the tube, I than have to click the axe of revolution button and select a line in order to make the the axe of...

Hello, How can i set my feature bar (SE v16), that more tools are visible ? When i add some extra, others are gone!! Can i make them smaler, so more are visible? gr Anthony

Hello, I have a model like a tennis racket with the handle standing up. In the round section i would like to make a 5 cm cutout slot in the middle, going all the way trough the material. The only problem, the slot must be tilted 17 degree from horizontal & and the center of this slot must...

Hi , I made a part in sheetmetal and i want to save it as a flat and also view it as a flat. Solid Edge version V16 please advise me how to!!!! greetings, Anthony

Dear Board members, I have a rifle barrel (308 win ) witch need a larger diameter at the chamber area. I was thinking of turning down the barrel diameter to 16 mm ( 0.62992 inch) and making a sleeve with a smaler inner diameter. The sleeve would be 0.62992 inch inner diameter and 0.78740 inch...

Dear Board members, On a cilinder part i need a external thread of 1x16TPI I need info to fill in the Holes.TXT file in solid edge program. A sample (in a different size) .0600;.0465;.0447;#0-80 UNF For the 1x16TPI i need the: Nominal diameter Internal minor diameter External minor...